A320 FMGS B52

[AirFan]

Hi JL,

some reporting about B52:

- I can confirm the mentioned cabin pressure issue on ground with packs on: Safety Valve Open
- Lateral offset is displayed in plan mode and alinged in current heading... so the lateral offset label is also up side down or i.e 90deg rotated depending on current heading
- Also saw wrong display of the flap position in EIS1... EIS2 is fine.
- Did a full reinstall of B52. With some hardware modules included during install... after that the FMGS_config.exe cant be closed correctly. Saving works but clicking on the upper right cross causes a crash. When closed via task manager I get an "Invalid pointer operation". Also reinstalled B50.2 to check... no issue there. Reproducable in B52.
-TERONND requires change of ND mode to be turned off on display.
-General question: When reducing the Thrust manually on the levers in ATHR on: ATHR limited pops up. Correct. But once you clear it keeps poping up again and again... is that the real behaviour? Shouldnt be one popup enough after you cleared the ECAM?

Many thanks for the awesome work!
Rob

[capt_pero]

Hi JL,

some reporting about B52:

- I can confirm the mentioned cabin pressure issue on ground with packs on: Safety Valve Open
- Lateral offset is displayed in plan mode and alinged in current heading... so the lateral offset label is also up side down or i.e 90deg rotated depending on current heading
- Also saw wrong display of the flap position in EIS1... EIS2 is fine.
- Did a full reinstall of B52. With some hardware modules included during install... after that the FMGS_config.exe cant be closed correctly. Saving works but clicking on the upper right cross causes a crash. When closed via task manager I get an "Invalid pointer operation". Also reinstalled B50.2 to check... no issue there. Reproducable in B52.
-TERONND requires change of ND mode to be turned off on display.
-General question: When reducing the Thrust manually on the levers in ATHR on: ATHR limited pops up. Correct. But once you clear it keeps poping up again and again... is that the real behaviour? Shouldnt be one popup enough after you cleared the ECAM?

Many thanks for the awesome work!
Rob

Are you sure you are using the default aircraft.cfg and PERF Data of JeeHell?

[romeow]

I miss the TD arrow on B52

After editing your post everything is understandable now.

For this issue go and see post #37

[AirFan]

Are you sure you are using the default aircraft.cfg and PERF Data of JeeHell?

Yes I am pretty sure as I've deleted the complete folder after uninstalling B50.2. There was nothing left and I've never touched the Perf data nor the aircraft.cfg. Just did a complete reinstall of B52.

Cheers,
Rob

[Klausi]

In #37 is written: TOD arrow will be back in next update.
how long will it take for the update to appear?
Lg

[romeow]

Please ask the Oracle of Delphi

[capt_pero]

Yes I am pretty sure as I've deleted the complete folder after uninstalling B50.2. There was nothing left and I've never touched the Perf data nor the aircraft.cfg. Just did a complete reinstall of B52.

Cheers,
Rob

Strange. I got the error with an older unsupportet version of an aircraft.cfg. No issues with the new aircraft.cfg of the A320-214.

[masterp]

Hi all,
I got FSX on PC1 (With 2 folders Aircraft-FMGS pasted to FSX\SimObjects\Airplane), FMGS Server installed on PC2 (Aircraft folders are included with default installation). TOPCAT on Laptop.
In TOPCAT, Changing payload/Fuel with target aircraft.cfg from both PC1 or PC2 are effective.
I am not sure which aircraft.cfg that the FMGS is using?

Thank
Vu

[Klausi]

Hello
I get after reaching the flightlevel the sound message ; Altimeter setting ; and the LED ALT is no longer on

[capt_pero]

Strange. I got the error with an older unsupportet version of an aircraft.cfg. No issues with the new aircraft.cfg of the A320-214.

Can confirm this issue does happen with vanilla config files. I had it yesterday but cannot really reproduce it...