Results 601 to 610 of 971
Thread: A320 FMGS B31
-
03-04-2014, 04:18 AM #601
Re: A320 FMGS B31
-
03-04-2014, 04:43 AM #602
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B31
Ben, what do you use for controls of flaps, gear and spoilers?
Can you send me the very same file ToTom pointed out (I PMed my mail)? (you can copy them from version to version, they keep the joystick configuration).
JL
-
03-04-2014, 05:13 AM #603
Re: A320 FMGS B31
Hi Jeehell, I've e-mailed you the 2 files (thank you ToTom)
I have it setup with the Logitech
Flaps are assigned to the buttons (one step increment, decrease)
Spoilers are assigned to the axis on the joystick
Auto pilot disconnect to the main trigger button.
-
03-04-2014, 06:11 AM #604
Re: A320 FMGS B31
Just did a outside view of my aircraft with engines not started yet -- look at the elevators and ailerons!
But I double checked my joystick config and everything seems to be in order...
Capture.jpg
edit--
Elevators and ailerons go back to normal positions after engine and hydraulics start.
I have noticed the aircraft is able to climb with A/P on at about 2500 V/S, but after I pull back the throttle (using THRLVRs.DLL) to throttle CLB, I can only climb less then 1000< V/S.
-
03-04-2014, 06:14 AM #605
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B31
Without hydraulics and no velocity, this is normal, the gravity pulls the governs down...
I looked at your files, they seem correct.
Please take the same picture as above (but with SD page on FCTL), but in the air while passing 5000ft or more.
JL
-
03-04-2014, 06:59 AM #606
Re: A320 FMGS B31
Screenshot at 6600 ft...difficulty climbing, now the aircraft will attempt to climb, then pitch down again.
Am I using the correct .air file? pa320-cfm56-2.air 2/9/2014
Capture.jpg
-
03-04-2014, 07:08 AM #607
Re: A320 FMGS B31
Hi Jeehell -- I have published a video -- http://www.youtube.com/watch?v=Rzj-E6Tpw6M with the problem
-
03-04-2014, 07:27 AM #608
Re: A320 FMGS B31
Notice some other ?bugs (this is with the latest release today) --
I like how you have inhibited speedbrakes when flaps are FULL, i also like it how you auto retract speedbrakes when flaps are going from flaps 3 to 4. However, when retracting back from flaps 4 to 3, or to 3 to 2, or to 1, I have noticed the inhibit function continues and *speedbrakes* (edited, originally posted as flaps) can no longer be extended. Is this the correct logic?
Sound loops with flaps still present but not there all the time now.
There is a rule that not all speedbrakes extend when AP is on, however when it AP is turned off, all speedbrakes will open. I will try and find that reference for you (I am not too sure if it can be programmed).
Thank you again JH.
-
03-04-2014, 07:40 AM #609
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: A320 FMGS B31
You don't arm the SPLRs with FSX controls by the way? Only with my software?
-
03-04-2014, 07:43 AM #610
Beautiful Girls from your town
Generic Analog Gauges