A320 FMGS B53

[brianwilliamson]

Thank you JL for the latest updates which I just installed in the Sim.I have not changed P3D to v. 5 at this stage, as I will probably wait until later in the year. I also have no FDS Overhead switches working at this stage, so it appears to be something with the FDS switches and leds.I guess it will give you a lot more work for you on the updates if I keep to P3D version 4.5 , so please let me know and I can change over to V5 Thanks..................Brian W.

[navigator88]

Thank you Jeehell for your last update. unfortunately I have a strange issue with engine oil pressure indications, 133 psi with the needles far beyond the gauges.I'm using P3D v 4.5 hotfix 3 and 3 computers.Can you help me to find a solution?Best regardsBen

[brianwilliamson]

Just done some testing to see if I can give some useful information :V.53.01 P3D V4.5The sim is all ok if I use Start Engines........The Overhead and Fcu all work and the test leds work on all.Using the Start Cold/Dark I can only turn 1 Bat on and it only turns on the FCU....nothing else.The Test switch will only light up the FCU.So there seems to be a small glitch when using Start cold/dark.Hope this helps .............Brian W

[buentead]

Just done some testing to see if I can give some useful information :V.53.01 P3D V4.5The sim is all ok if I use Start Engines........The Overhead and Fcu all work and the test leds work on all.Using the Start Cold/Dark I can only turn 1 Bat on and it only turns on the FCU....nothing else.The Test switch will only light up the FCU.So there seems to be a small glitch when using Start cold/dark.Hope this helps .............Brian W

Hi Brian

I'm also using the FDS HW for my overhead panels. Please have a look earlier in this thread regarding the problem I have. Maybe it is the same issue you have. Please check if things are working correct, when you apply external power first (all switches off as in "cold an dark", just switch on the external power and then start BAT1+2, etc.).

Adrian

[jeehell]

HiI added support for ASP3D with P3D V5. update is live on the updater.

[brianwilliamson]

Thanks Adrian, but in my situation I am starting up at the Runway and no external power, so I do not think that will help in my case.On ground operating conditions,the APU is started by the aircraft batteries or aircraft batteries in combination with Transfomer Rectifier Units as far as I am aware.Cheers..........Brian W

[asessa]

HiI added support for ASP3D with P3D V5. update is live on the updater.

Hi JL, thanks! Question : do we also reinstall navdata ?

[asessa]

B53.1, the weather radar works perfectly with asp3d!

[bbruechmann]

@asessa: does it work with TrueSky (enhanced Atmo) or legacy mode, or even with both??!!

[asessa]

@asessa: does it work with TrueSky (enhanced Atmo) or legacy mode, or even with both??!!

ASP3D works with both engines but it has some limits with EA.I'm using legacy mode with ASCA and ENVSHADE . When EA will be official (now it's a beta) i will switch on EA