A320 FMGS B31

[OmniAtlas]

Thank you for the informed answer -- didn't know you had access to an A320

Are you a RW pilot by any chance?

Good to hear we have so many simulation hobbyist in this forum with access to the real deal.

[filippoporcari]

nope ben...i'm not a pilot
btw i've some very good friends which are captains and i fly with them whenever i can (on the real aircraft i mean)...moreover they fly in my sim of course...one of them is a type rating examiner at alitalia training center so...i've access also to alitalia simulators: yes i'm lucky!
cheers
fil

[Jerec]

Hello everybody,

i´ve got a small problem, that in the newest version no TERRONND is displayed. I reinstalles already the FMGS and did a second run of dataextractor and folders 40 and 50 are build. On ND icon TERR is visible, but not the small bracket with two numbers and the "swoosh" with data doesnt appear. Anyone has an idea, what could be the issue?
PFD and ND are both on remote PCs, but in the past it worked perfectly.

Regards Henrik

[jeehell]

Hi,

TCAS is limited at 40NM on the old TCAS hardware. And they also prevented the display on ND if EFIS range is at or above 80NM. They may have changed that in newer versions...

Regarding the terrain: try again, it should work. If your computer is not fast, it may take soem time to get a display. Also the TERR ON ND must be ON and on the OVHD the TER button must be ON as well.

JL

[filippoporcari]

yes jl, of course u're right! i forgot that when i noticed the 80nm or more TCAS traffic display i was flying on a 320 enhanced!!!!
regards
filippo

[tcane]

Hi Jl,
i got a small and only sometimes problem with my Joystick (Thrustmaster).
Sometimes the Sidestick Joystick doesn´t work or suddenly stop working. If i change to your config Program for the axes of Elevator etc., the joystick is recognized without any problems.
This problem is very rare, but still a bit annoying when you're fly online and on approach you determine that after disabling the AP, the joystick does not work.

By the way flying online:
I got the RMP from Cockpitsonic with the EHID driver... sometimes is the frequency for the control like 150.055 (it´s the 8,33kHz frequency?) but i can´t change to this frequency because the rmp does not provide these. Can you add this maybe?

Looking forward
Florian

[Jerec]

Hi JL,

just checked it again: Button TERR on ND set to on, ND shows "TERR" but no small brackets with numbers and Terrain. Which button on OVHD do you mean? CPU usage on Remote PC is about 45%, so enough power to go for terrain.

Regards Henrik

[jeehell]

Hi,

I never experienced any issue with joysticks no longer being recognized. If othe people have it, or if you can make it easily reproducible, I'll look into it, but right now I have nothing to start investigating on...

As for the 8.33kHz sapcing, I will look into it.

Regards,
JL

[OmniAtlas]

Hi JL,

just checked it again: Button TERR on ND set to on, ND shows "TERR" but no small brackets with numbers and Terrain. Which button on OVHD do you mean? CPU usage on Remote PC is about 45%, so enough power to go for terrain.

Regards Henrik

I also have issues with the terrain showing when running the ND over the network. The data is present on the network computer so I am not too sure why it doesn't work (trialed on my macbook air running Windows 7 so it may be too slow).

No problems with terrain running on a local computer with P3D.

[tcane]

Hi,

I never experienced any issue with joysticks no longer being recognized. If othe people have it, or if you can make it easily reproducible, I'll look into it, but right now I have nothing to start investigating on...JL

Yes of course i understand this! In next day´s i will make a fresh installation of my pc... maybe the problem is solved then.

As for the 8.33kHz sapcing, I will look into it.

Sounds great and would be very happy about this!