Results 1 to 10 of 10
  1. #1
    150+ Forum Groupie
    Join Date
    Sep 2007
    Location
    Northern Italy
    Posts
    160
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Question Fuel Used displayed in Kilos, with LBS as measure unit

    I have noticed that, even if the unit of measure selected within the CDU is "Lbs", the amount of fuel used is displayed by the GC EICAS (any page, I guess) in KGs

    True bug or me myself missing something ?
    Happy landings and always three greens !!

    Eu

  2. #2
    150+ Forum Groupie michelmvd's Avatar
    Join Date
    Nov 2005
    Location
    Oostende - Belgium
    Posts
    222
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    I don't know if you use separate programs for the PFD/ND capt or F/O side.
    All ini's must be in lbs then.
    Not only the one on the EICAS pc.
    B. RGds
    Michel
    _______________________________________________
    Michel VANDAELE
    msn : michelmvd@hotmail.com
    website B744 : users.telenet.be/michel.vandaele/sim1.htm
    general website : users.telenet.be/michel.vandaele
    my spaces: http://michelmvd.spaces.live.com/
    email : michelmvd@hotmail.com

  3. #3
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,221
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by eudoniga View Post
    I have noticed that, even if the unit of measure selected within the CDU is "Lbs", the amount of fuel used is displayed by the GC EICAS (any page, I guess) in KGs

    True bug or me myself missing something ?
    If I am not mistaken, there is a ini setting that tells it to use metric or imperial...

    I can't remember and my sim computers are down right now.

    Trev
    ________________________
    Trevor Hale

  4. #4
    150+ Forum Groupie
    Join Date
    Sep 2007
    Location
    Northern Italy
    Posts
    160
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    other details

    I have the EICAS GC and the F/O GC running on one pc with double video output.

    The unit of measure is chosen and set - AFAIK - from the CDU, 'SETTINGS' page, and therefore it should - in theory - reach and influence every GC module via NETDIR, overrunning any different previous local settings of the GC .ini

    In FS, too, I have selected the imperial measure units (in case this might influence PM ...).

    What's strange is that the fuel qty triple round gauge on the EICAS reads "LBS", and that the F/F value is also expressed in K-Lbs/hour ... but the Fuel Used is clearly expressed in kilos, what you can tell for sure after a full flight when you look at the numbers ...

    Maybe the choice must be repeated for every single GC module, so I will look at all single .ini files.

    Will report back asap.

    Do you use LBS as the measure unit, too ?

    If so, do you get the correct value displayed on the EICAS, so that we can tell that the software is okay "per se" and there must something wrong with my setup ?
    Happy landings and always three greens !!

    Eu

  5. #5
    300+ Forum Addict
    Join Date
    Jan 2007
    Posts
    496
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by eudoniga View Post
    The unit of measure is chosen and set - AFAIK - from the CDU, 'SETTINGS' page, and therefore it should - in theory - reach and influence every GC module via NETDIR, overrunning any different previous local settings of the GC .ini
    Check that you do have

    Type=CDU

    set in the [Network] section of the PFD.INI files. I'm not sure whether the GC uses the CDU values if you don't have this set.

    Maybe the choice must be repeated for every single GC module, so I will look at all single .ini files.
    Yes, check the above parameter in each and every one.

    If so, do you get the correct value displayed on the EICAS, so that we can tell that the software is okay "per se" and there must something wrong with my setup ?
    I have the PFD.INI "KGs" parameter set to off, but the EICAS display responds immediately to changes between Lbs and Kgs in the CDU, which is on a different PC in the network. Apart from that "Type=CDU" parameter I can see nothing else which might influence this in the INI file.


    Regards

    Pete

  6. Thanks eudoniga thanked for this post
  7. #6
    150+ Forum Groupie
    Join Date
    Sep 2007
    Location
    Northern Italy
    Posts
    160
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thumbs up Wilco !

    Thanks mr. Dowson !

    Your level of precision in both intuition & perception related to these kind of problems is - as usual - immense !!!



    I would surprise me to find the TYPE= parameter of the EICAS GC set to something else than 'CDU', since the CDU module came along together with the GCs, but I will gladly check about it ...

    Happy landings and always three greens !!

    Eu

  8. #7
    150+ Forum Groupie
    Join Date
    Sep 2007
    Location
    Northern Italy
    Posts
    160
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Unhappy Alas !

    Last night I opened and checked all three pfd.ini ...
    All 'TYPE=' were set to 'CDU'
    All 'KGS=' were set to 'OFF'

    After some flying, I had burned 3 k some Lbs of fuel; starting from 11 k Lbs loaded, the CDU PERF and PROG pages displayed 8 k some Lbs left ...

    But the EICAS, when switching from F/F to FU, displayed 700 some Lbs per lateral tank ... and that sounds kilos, not pounds, correct ?

    Is there anywhere else for me to go, check and see what causes this misbehavior, before I surrender ?

    I'm out of ideas ...

    Regards to y'all,
    Happy landings and always three greens !!

    Eu

  9. #8
    300+ Forum Addict
    Join Date
    Jan 2007
    Posts
    496
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by eudoniga View Post
    Last night I opened and checked all three pfd.ini ...
    All 'TYPE=' were set to 'CDU'
    All 'KGS=' were set to 'OFF'
    In that case I don't understand why your EICAS doesn't follow your CDU setting. Sorry.

    You'll need to send your problem direct to support@projectmagenta.com.

    After some flying, I had burned 3 k some Lbs of fuel; starting from 11 k Lbs loaded, the CDU PERF and PROG pages displayed 8 k some Lbs left ...

    But the EICAS, when switching from F/F to FU, displayed 700 some Lbs per lateral tank ... and that sounds kilos, not pounds, correct ?
    It certainly doesn't sound right, for sure.

    Pete

  10. #9
    150+ Forum Groupie
    Join Date
    Sep 2007
    Location
    Northern Italy
    Posts
    160
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Question Eicas & Cdu

    Yep, because the EICAS seems to "follow" the CDU for all the rest ... therefore it surely can access the NetDir, and so does the F/O GC running on that very same client.

    Does your EICAS follow your CDU also for the "Fuel Used" display, when it gets to showing Lbs instead of kilos ?

    Is there a chance - in theory - that the flag switch between the two units was not provided for this specific measure on the EICAS page ?
    Happy landings and always three greens !!

    Eu

  11. #10
    300+ Forum Addict
    Join Date
    Jan 2007
    Posts
    496
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by eudoniga View Post
    Does your EICAS follow your CDU also for the "Fuel Used" display, when it gets to showing Lbs instead of kilos ?
    I haven't looked for some time. I think it did last time I looked, but that would probably have been with much older versions of PM modules. My system's down at present so I can't check. Maybe others can say?

    Regards

    Pete

Similar Threads

  1. FSCUIP version not displayed???
    By James Twomey in forum FS2Phidget Users
    Replies: 10
    Last Post: 07-10-2011, 07:57 AM
  2. Help v/s Altitude displayed infornation
    By Tuga_75 in forum OpenCockpits General Discussion
    Replies: 6
    Last Post: 08-01-2010, 09:17 AM
  3. real 737 Throttles measure
    By Jackpilot in forum General Builder Questions All Aircraft Types
    Replies: 1
    Last Post: 07-09-2009, 11:29 PM
  4. No displayed Route
    By charliel in forum PM Boeing FMC/CDU
    Replies: 4
    Last Post: 04-09-2009, 04:03 AM