Results 1 to 10 of 11
Thread: Wiring
-
06-09-2007, 12:22 PM #1
Wiring
Hey guys,I just bought two 767 yokes,they have 16 different wires:white with blu,white with violet,etc...my question is where can I buy all those different kind of wires at?I would like to get a couple of spools.Many thanx if someone could tell me.
-
06-09-2007, 02:24 PM #2TimGuest
Maybe Mouser. www.mouser.com .
I have purchased colored ribbon cable from them before.
10 color, 40 conductor. Mouser part number 517-3302. That p/n may have changed.
You might give them a call and explain what you need.
Regards,
Richard
-
06-09-2007, 03:08 PM #3
wiring
Many thanx Richard I will try them out.
-
06-09-2007, 04:32 PM #4
wiring
It looks like they only sell solid colors...Anybody got anything else.
-
06-09-2007, 05:01 PM #5
The type of wire Boeing uses is hard to find. I don't know where you could find such wire unless you tracked down the sub-contractor.
I used 20ga on my yoke and just tagged each wire on the harness.Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
06-09-2007, 05:19 PM #6TimGuest
Finding the exact colors your yokes have may be impossible. As BSW noted, it might be best to get close as you can and make a wire color chart to show the color matches and tag the ends.
I have also used a parallel port cable for wiring. Just cut off the connectors. Colors are solid but the one I used had twenty-five distinct colors to use.
Richard
-
06-09-2007, 07:10 PM #7
wiring
Many thanx for the advise guys.
-
06-10-2007, 11:55 AM #8
Another possibility is terminate the Boeing wires with a cannon plug or other type of connector. Then output to a new wire list for what you have. You might use a certain color for ground in the project. This what you can easily trace by color's certain paths. Say red is used for power "+" and black for "-" or ground.
If you have MS Excel you can create a spreadsheet to keep track of your wires. Your going to have a bunch. This is how I plan for my project. This way I can always go back and follow different paths of wires. Use a wire bundle method and a lot of zip ties to help narrow down troubleshooting.
-
06-10-2007, 01:35 PM #9
I don't know if this applies for the 767 yokes, but here is the trim switch wiring for the 727 and 737.
Boeing Skunk Works
Remember...140, 250, and REALLY FAST!
We don't need no stinkin' ETOPS!
Powered by FS9 & BOEING
-
06-10-2007, 01:39 PM #10
Wiring
Thanx BSW I will check it out see if they are the same...
Similar Threads
-
help ref wiring
By BishBash in forum I/O Interfacing and HardwareReplies: 26Last Post: 11-03-2010, 07:06 PM -
Wiring the o/c boards
By Drewsta in forum OpenCockpits General DiscussionReplies: 6Last Post: 12-17-2009, 01:48 AM -
Need a wee bit of help wiring....
By Crescent in forum Computer Hardware SetupReplies: 2Last Post: 03-13-2009, 01:37 AM -
wiring
By phil. in forum OpenCockpits General DiscussionReplies: 3Last Post: 09-15-2008, 03:38 AM -
Easier wiring
By Lezam in forum I/O Interfacing Hardware and SoftwareReplies: 5Last Post: 02-22-2008, 12:20 AM
Search Prettys Womans from your city for night
5.Sharing an Essay about PIC16F877