Company Route Editor 4 JeeHell FMGS

[capt_pero]

Hi Community,

I am working with Dieter Kreiskott on a Company Route Editor to make handling of the corte.xml easier. GUI and main functions are done so far. I am planning to integrate a route validation as well but first focus on main functions.

See here: http://aviation.pero-online.de/wordpress/?p=1713

@Jean-Luc:
I realized that a airway "LEG" contains the "AIRWAY" and the "EXIT WAYPOINT". That means the first airway has no first waypoint accept from the SID. If I am trying to save a route like this EDDS ETASA Z724 KETEG Z12 WUR Z744 LEPSA Z104 PSA EDDF we would miss the SID.

This route should bring us this xml, right?

  <CORTE ID="EDDSEDDF01" TYPE="CORTE" FROM="EDDS" TO="EDDF" FLTNBR="DLH440" CI="NONE" CRZFL="NONE">
    <DEPARTURE RWY="NONE" SID="NONE" TRANS="NONE" />
    <LEG SEQ="0" TYPE="AWY" ID="Z724" WPT="KETEG" />
    <LEG SEQ="1" TYPE="AWY" ID="Z12" WPT="WUR" />
    <LEG SEQ="2" TYPE="AWY" ID="Z744" WPT="LEPSA"  />
    <LEG SEQ="3" TYPE="AWY" ID="Z104" WPT="PSA"/>
    <ARRIVAL TRANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE" />
    <ALTN ICAO="NONE" ID="NONE" />
  </CORTE>

But then we would miss the SID and the first waypoint ETASA
Any idea how to handle this? :O)

Thank you!

[jeehell]

<CORTE ID="EDDSEDDF01" TYPE="CORTE" FROM="EDDS" TO="EDDF" FLTNBR="DLH440" CI="NONE" CRZFL="NONE">
<DEPARTURE RWY="NONE" SID="NONE" TRANS="NONE" />
<LEG SEQ="0" TYPE="DIR" WPT="ETASA" />
<LEG SEQ="1" TYPE="AWY" ID="Z724" WPT="KETEG" />
<LEG SEQ="2" TYPE="AWY" ID="Z12" WPT="WUR" />
<LEG SEQ="3" TYPE="AWY" ID="Z744" WPT="LEPSA" />
<LEG SEQ="4" TYPE="AWY" ID="Z104" WPT="PSA"/>
<ARRIVAL TANS="NONE" STAR="NONE" VIA="NONE" APPR="NONE" />
<ALTN ICAO="NONE" ID="NONE" />
</CORTE>

[capt_pero]

@JeeHell: That makes sense. Thank you.

--

I found another issue, regardless if CORTE or PILRTE. Each route needs to have a DEP RWY to be loaded correctly in "FLT PLN" page (after enter it on INIT page). If I went to "DATA" page the requested route will be shown correctly.

Do I miss something?

--

The Company Route Editor is BETA at the moment. Will be available soon - Freeware for sure!

[capt_pero]

Some news from development. Input validation based on the current AIRAC is implemented. Started with DEPARTURE. ARRIVAL will follow soon.

[capt_pero]

Ready for download. At the moment in BETA:
http://aviation.pero-online.de/wordpress/?page_id=1725

[capt_pero]

Updated to version 0.4.1 with some bugfixes.
http://aviation.pero-online.de/wordpress/?page_id=1725

[cmdr114b]

Can you tell me, where do I find WPNAVAID.TXT, WPNAVFIX.TXT and WPNAVRTE,TXT?
I have a subscription with Navigraph for my Navdata but none of those files are included as you suggested.
Would I need to purchase some other package to make this work?
Thanks for all your work on this.
John

[pete_fuss]

Can you tell me, where do I find WPNAVAID.TXT, WPNAVFIX.TXT and WPNAVRTE,TXT?
I have a subscription with Navigraph for my Navdata but none of those files are included as you suggested.
Would I need to purchase some other package to make this work?
Thanks for all your work on this.
John

Hello John,

you need Level-D NavData and in this subfolder you will find these *.txt files

regards peter

[cmdr114b]

OK, got it.
Many thanks
John

[cmdr114b]

I have just updated to version Beta V0.51(rev.2) and I still have a problem with the paths to save the corte.xml to.
I had thought that this was just a permissions issue and double checked the share to my navdata1 folder because I kept getting this error



So I created a navdata1 folder in the same folder that I run Cortemanager and copied an empty corte.xml file there.
I still get permissions problem when I try to save the route which should not happen when I use this folder.



I have also tried running the program as administrator but I get the same results.
Any idea's?

John