Results 1 to 6 of 6
  1. #1
    75+ Posting Member Crescent's Avatar
    Join Date
    Jun 2008
    Location
    Kelowna, British Columbia
    Posts
    131
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Removing Monitor Bezel

    How does one remove a flatscreen monitor bezel?

  2. #2
    150+ Forum Groupie skino's Avatar
    Join Date
    Nov 2008
    Location
    germany
    Posts
    297
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Removing Monitor Bezel


  3. #3
    25+ Posting Member Jess's Avatar
    Join Date
    Sep 2007
    Location
    Eastern Ontario, Canada
    Posts
    29
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Removing Monitor Bezel

    It will depend on the monitor and if you want to replace the bezel after. Remove the stand. Remove any screws at the back holding the plastic cover. I use a stiff 1" putty knife, sometimes two, in order to work around the mating edges, releasing the internal plastic clips without damaging the plastic. If you don't care about the plastic edges or clips you could just use a a screwdriver. One thing to watch is around the switches, as there is a wire to the switches that are sometimes attached to the front plastic bezel and that you don't want to break.
    Bell 206 JetRanger Simulator - www.computerrepairs.ca

  4. #4
    Boeing 777 Builder


    Kennair's Avatar
    Join Date
    Jan 2007
    Location
    Perth, Western Australia
    Posts
    728
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Removing Monitor Bezel

    As Jess says work carefully and slowly as each monitor type has a completely different method of attachment but usually its just clipped together around the perimeter. Also once removed you might find the controller box behind the LCD screen comes free as it is usually held in place by the plastic surround so you may need to provide extra support for this without the bezel.

    BTW, Jess that is one serious chopper sim you've got there. Would love to hear more about its development. You've obviously got some machining background in order to fabricate your flight controls.

    Cheers,

    Ken.
    Opencockpits | Aerosim Solutions | Sim-Avionics | P3D | FDS | FTX | AS16 | PPL | Kennair


  5. #5
    150+ Forum Groupie flatlandpilot's Avatar
    Join Date
    May 2009
    Location
    Netherlands, Zwolle
    Posts
    150
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Removing Monitor Bezel

    When fixing a `naked` screen to a new location you have to
    be carefull not pressing the screen to much to the pit-shell,
    otherwise you get nasty lightspots which you can see when
    the monitor wants to produce a black picture.

    using foamtape, kit or rubbertape will help in avoiding pressurepoints.
    When once you have tasted flight,
    you will forever walk the earth with your eyes turned skyward

  6. Thanks Crescent thanked for this post
  7. #6
    25+ Posting Member Jess's Avatar
    Join Date
    Sep 2007
    Location
    Eastern Ontario, Canada
    Posts
    29
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Removing Monitor Bezel

    Quote Originally Posted by Kennair View Post
    BTW, Jess that is one serious chopper sim you've got there. Would love to hear more about its development. You've obviously got some machining background in order to fabricate your flight controls.

    Cheers,

    Ken.
    Ken,

    I don't really want to hyjack this topic but here is a little history;

    I always wanted a metal lathe in my younger days, but never was able to get my hands on one. I originally made the flight controls for my simulator out of "junk" laying around my shop. As my simulator progressed, and the software to make it run properly (Dodosim 206) was finished, I decided I needed a better system for the flight controls. I bought a lathe/mill combination machine and started some designs that would give an accurate representation of Bell 206 flight controls and helicopter controls in general. No real machining skills, just a desire to learn something that would give me what I needed.

    I placed the pictures of my controls on my website so others could use it as a reference, for ideas to build their own controls. It seems many builders either don't have the tools, the time, or maybe the "where with all" needed to make their own, so I started getting requests to build flight controls for their cockpits. From there it has developed into another sideline business of sorts. From the requests I get I may be headed into building complete helicopter simulators before long.

    One thing leads to another in this hobby,


    -Jess
    Bell 206 JetRanger Simulator - www.computerrepairs.ca

  8. Thanks Kennair thanked for this post

Similar Threads

  1. Removing the panels in VC mode
    By APAK in forum Cockpit Outside Visualization
    Replies: 9
    Last Post: 10-29-2016, 03:25 PM
  2. Removing the cockpit view from FSX
    By JimmyGerrard in forum General Microsoft Flight Simulator 10 (FSX)
    Replies: 17
    Last Post: 10-31-2009, 03:00 PM
  3. Bezel
    By Jackpilot in forum Off Site Articles For Sale
    Replies: 0
    Last Post: 07-29-2009, 01:46 PM
  4. Removing camera views
    By Martin Cumming in forum General Builder Questions All Aircraft Types
    Replies: 0
    Last Post: 09-08-2007, 01:18 PM