Results 1 to 1 of 1
-
12-18-2005, 10:24 AM #1
Beware of memory bank height when using big coolers
In July 2005 I decided to build a new PC for MSFS and pmMCP from carefully selected components.
In this Coolermaster Centurion 531 with an Enermax 490W powersupply, the mainboard is an ASUS-A8N-SLI Deluxe, AMD Athlon 64 Venice 3500 with Zalman CNPS7700-Cu and Corsair Twinx1024-3200 Mb DDR SDRAM 400Mhz matched pair memory. The videocard is a Gigabyte GV-NX66T128VP, Harddisk Maxtor DiamondMax Plus 10 250 GB, 7.200 rpm, 16 MB, SATA/150
As you can see the CPU-fan is pretty big and hangs over the memory bank slots A1 and A2.
And so it turned out that in the A1 slot the memory bank with performance-leds on top did not fit under the zalman processor cooler
The supplier allowed for a quick swap for equal-type memory but now without the leds on top.
A happy end after all.Kester Meijer
http://www.mycockpit.nl - to see my cockpit construction
Certified De-Ice Supervisor EHAM
Similar Threads
-
Yoke height and diameter of control column?
By HondaCop in forum General Builder Questions All Aircraft TypesReplies: 6Last Post: 09-03-2010, 08:18 PM -
Extruded Acrylic/Plexi : BEWARE
By Hessel Oosten in forum Westozy's Mechanical EngineeringReplies: 12Last Post: 12-04-2009, 02:04 PM -
Beware of 737ng
By capttlm in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 0Last Post: 09-25-2009, 04:46 PM -
CH Yoke Height
By redman in forum Where to Start Building a Home CockpitReplies: 4Last Post: 08-30-2007, 11:52 AM -
real apu panel can anyone give me the height?
By steve diamond in forum PM General Q & AReplies: 0Last Post: 01-30-2005, 02:05 PM
Explore Exciting Connections for a Night of Fun in Your City
Ready for an Unforgettable Night?...