Results 1 to 6 of 6
Thread: Read sioc server offset
-
04-09-2010, 02:10 PM #1
Read sioc server offset
I'm trying to get data out of the SIOC server program with sioc.exe. for light an LED
But it will not succeed.
I use Open Cockpit USB and the Mastercard
SIOC offset 2810, can be read without any problems by Gauges Composer.
I can read from FSUIPC.
What am I doing wrong.
Var 0000, Value 0 // Initializing
{
}
var 0001, Link IOCP, Offset 2810 // wing logo lights
{
IF v1 = 100
{
V2 = 1
}
IF v1 < 100
{
V2 = 0
}
}
Var 0002, Link IOCARD_OUT, Output 12 // Test led 2
Please some help nededSincerely,
Claus
-
04-09-2010, 02:27 PM #2
- Join Date
- Jul 2013
- Posts
- 917
Re: Read sioc server offset
Claus
On the following assumptions:-
FSUIPC has the variable you need
The offset value you have given is in hex
The FSUIPC offset length is one byte
Then try this line
var 0001, Link FSUIPC_IN , Offset $2810 Length 1 // wing logo lights
David
-
04-09-2010, 04:44 PM #3
Re: Read sioc server offset
Hi David
These offsets are retrieved from the Leonardo Maddog, and these data can not be retrieved with FSUIPC.
We are currently testing new software which is made by Juan Ascanio from Open Cockpit.
It is also as Juan has made the program SIOCServer.
The great thing about this new software is that it can retrieve data via the virtual cockpit.
Everything is in the first phase. but looks promising for all sim builders.
But I've having problems with getting in contact with SIOCServer and retrieve those offsets. Everything else works.
_______________________________
http://www.md80project.dkSincerely,
Claus
-
04-09-2010, 05:17 PM #4
- Join Date
- Jul 2013
- Posts
- 917
Re: Read sioc server offset
Claus
Ok, good luck. I had assumed that the IOCP command syntax would be the same as FSUIPC_INOUT
David
-
04-09-2010, 05:35 PM #5
- Join Date
- Apr 2009
- Location
- Toronto
- Posts
- 125
Re: Read sioc server offset
Hello Claus.
On the SIOC main panel, does Client Module #0 show the correct IP address and Port for the other server and is the client module enabled? Is it connected to the other server?
Jim
-
04-09-2010, 06:08 PM #6
Re: Read sioc server offset
Hello Jim
Thanks a lot.
The siocserver whas set to "disconnected" in the ini file.
It is newer to late to learn.
_______________________
http://www.md80project.dkSincerely,
Claus
Similar Threads
-
Throttle offset in SIOC not working with FSUIPC
By twisted8 in forum I/O Interfacing and HardwareReplies: 3Last Post: 03-23-2011, 11:12 PM -
DA...ALL I HAD TO DO IS READ THE TABS!!!
By brother777 in forum Welcome to MyCockpit New here? Introduce Yourself!Replies: 1Last Post: 03-21-2011, 01:57 PM -
SIOC server and clients
By nax228 in forum OpenCockpits General DiscussionReplies: 7Last Post: 02-15-2011, 10:03 AM -
Change SIOC server address?
By nax228 in forum I/O Interfacing and HardwareReplies: 2Last Post: 01-03-2011, 05:54 AM -
Level D 767 pit or OTHER?? Read and see what I mean.
By shearder in forum General Builder Questions All Aircraft TypesReplies: 2Last Post: 02-21-2010, 03:09 AM
Prettys Womans from your city for night
A320 Sound Files Missing