Keystroke via FSUIPC & wide FS

[Renaud Emont]

Ok, I will check for EPIC direct input to WideFS.

Everyting would be simple if My EPICs cards were plugged into my FS computer,
but it is not the case ....

Will continue in this topic if successful.

[Peter Dowson]

On 1/3/2005 2:12:34 PM, Renaud Emont wrote:
>Ok, I will check for EPIC
>direct input to WideFS.
>
>Everyting would be simple if
>My EPICs cards were plugged
>into my FS computer, but it is
>not the case ....

WideFS has handled button stuff from EPICs for some time. Only the exis
inputs aren't handled.

Regards,

Pete

[Renaud Emont]

Impossible to make it work .....

WideFs seem only to make keysent from server to client. Can't make the
inverse ... (

My goal is only to have Time speak on the FS computer, and command the Push
to talk from my EPICsystem computer.

[Peter Dowson]

On 1/6/2005 5:37:07 AM, Renaud Emont wrote:
>Impossible to make it work
>.....
>
>WideFs seem only to make
>keysent from server to client.
>Can't make the inverse ...
>(

No, that isn't true. You can tell Wideclient to send ALL keystrokes it gets
to FS on the Server. The parameter is:

SendKeyPresses=Yes

as documented in WideFS.doc. But for it to work WideClient must have the
keyboard focus OR you have to write a program to send the keystroke to
WideClient's window (class FS98MAIN).

>My goal is only to have Time
>speak on the FS computer, and
>command the Push to talk from
>my EPICsystem computer.

I don't know "Time speak", but does it use ordinary key messages or does it
actually "hot key" the keyboard? In the latter case it might be difficult to
do anything except locally.

But, in any case, I don't understand, if you have EPIC, why you are using a
keyboard on the Client PC for PTT. Why not use a Button? FSUIPC will
recognise buttons pressed on any Client computer, so you then just need to program
the button on the FS PC. You can program it to do a Roger Wilco or AVC
"PTT" directly, or send keystrokes if that's what you need to do. Have you not
looked at doing it this way? Why are you using key presses on the Client
PC in the first place?

Regards,

Pete

[Michel Vandaele]

Hi Peter,
Maybe it is interesting to know, that Team Speak is now the official voice

program on the IVAO network and that you don't need RW anymore when using
the new IVAP clientsoftware (which is replacing SB)

Can you program a direct PTT button to Team Speak, as you did for AVC and RW

in the past ?

Many thanks

Michel


--
Michel VANDAELE
Member of the board FSCB
EBOS2002 Designteam
My B744 simulator project
http://users.pandora.be/michel.vandaele/sim1.htm

>>Impossible to make it work
>>.....
>>
>>WideFs seem only to make
>>keysent from server to client.
>>Can't make the inverse ...
>>(
>
> No, that isn't true. You can tell Wideclient to send ALL keystrokes it
> gets
> to FS on the Server. The parameter is:
>
> SendKeyPresses=Yes
>
> as documented in WideFS.doc. But for it to work WideClient must have the
> keyboard focus OR you have to write a program to send the keystroke to
> WideClient's window (class FS98MAIN).
>
>>My goal is only to have Time
>>speak on the FS computer, and
>>command the Push to talk from
>>my EPICsystem computer.
>
> I don't know "Time speak", but does it use ordinary key messages or does
> it
> actually "hot key" the keyboard? In the latter case it might be difficult

> to
> do anything except locally.
>
> But, in any case, I don't understand, if you have EPIC, why you are using

> a
> keyboard on the Client PC for PTT. Why not use a Button? FSUIPC will
> recognise buttons pressed on any Client computer, so you then just need to

> program
> the button on the FS PC. You can program it to do a Roger Wilco or AVC
> "PTT" directly, or send keystrokes if that's what you need to do. Have you

> not
> looked at doing it this way? Why are you using key presses on the Client
> PC in the first place?
>
> Regards,
>
> Pete
>

[Peter Dowson]

On 1/6/2005 1:53:45 PM, Michel Vandaele wrote:
>Hi Peter,
>Maybe it is interesting to
>know, that Team Speak is now
>the official voice
>program on the IVAO network

Ah! It was "Team Speak" in the orginal message, not "Time Speak"? Yes, I know
it is used by IVAO, and I recently sorted out the way to get its PTT
working across WideFS. Please check the current WideFS documentation.

>Can you program a direct PTT
>button to Team Speak, as you
>did for AVC and RW
>in the past ?

Not direct, no. It's by a key press, but using the new feature
"UseSendInput". It is all clearly defined in the WideFS documentation. Take a look when
you have time.

If you are using TeamSpeak on the FS PC, you simply program a button to send
the key. According to other Team Speak users you need to choose a Key with
no other ramifications, because TeamSpeak doesn't "swallow" it, it allows
it to pass through!

Regards,

Pete

[Michel Vandaele]

Hi Peter,
Thank you for your quick answer

> Not direct, no. It's by a key press, but using the new feature
> "UseSendInput". It is all clearly defined in the WideFS documentation.
> Take a look when
> you have time.

Okidoki, will go true the documentation during the weekend
>
> If you are using TeamSpeak on the FS PC, you simply program a button to
> send
> the key. According to other Team Speak users you need to choose a Key
with
> no other ramifications, because TeamSpeak doesn't "swallow" it, it allows
> it to pass through!
>

No I'm using Teamspeak on a client pc together with IvAp (no RW or SB
involved anymore), but the PTT button is on my yoke, which is connected to

my flightsim pc.

Ciao

Michel