Results 1 to 2 of 2
-
12-14-2008, 03:53 PM #1
USB Outputs not recognized - Please Help
Ok, so I have loaded Sioc. I modified the sioc.ini file as follows:
[Fichero de configuracion para el SIOC]
[ Configuration file for SIOC ]
Version=3.5
generated_by=Config_SiocIni
[SIOC]
IOCP_port=8092
IOCP_timeout=4000
Minimized=No
toggle_delay=20
CONFIG_FILE=.\L45LED.ssi
[IOCARDS MODULE]
IOCard_disable=No
IOCard_LPT=No
[MASTERS]
MASTER=0,6,1,214
[USBSTEPPER]
[USBKEYS]
[USBSERVOS]
[USBRELAYS]
[USBMOTOR]
[USBANALOGIC]
[FSUIPC MODULE]
FSUipcdisable=No
FSUipcRefresh=50
[IOCP CLIENTS MODULES]
IOCPini_delay= 3000
IOCPclient0_disable=No
IOCPclient0_host=localhost
IOCPclient0_port=8090
IOCPclient1_disable=No
IOCPclient1_host=localhost
IOCPclient1_port=8091
[SOUND MODULE]
Sound_disable=No
Volume=100
[ #1 ]
Sound=*outermk.wav,-1,-1,-1
[KEYBOARD EMULATOR MODULE]
window=a.txt - Bloc de notas
#1=\B\A_
[ End of File ]
I have created a .ssc file called L45LED.ssi. I have done a lights test and that is fine. Yet nothing is working. When I look at the SIOC screen it shows IOCards Module Status as "Stopped" as you can see below. It also shows the USB Outputs card under Devices pane but with no IDX number and an out of range Device number. Any ideas?
-
12-14-2008, 04:16 PM #2
Nevermind
Found my error. Device was "212" and I had put "214" in sioc.ini. Its working now!
Thanks
Similar Threads
-
OC USBKeys card not recognized in windows 7
By Jasmckee in forum I/O Interfacing Hardware and SoftwareReplies: 29Last Post: 10-13-2010, 03:56 AM -
Oc master 64 outputs???
By shafian in forum I/O Interfacing Hardware and SoftwareReplies: 13Last Post: 11-12-2008, 08:47 AM -
Outputs to CDU
By Bill in forum PM Boeing FMC/CDUReplies: 5Last Post: 08-06-2008, 10:16 AM -
Outputs Needed
By 767300 in forum PM General Q & AReplies: 3Last Post: 06-17-2008, 03:50 PM -
MCDU not recognized
By null null in forum PM General Q & AReplies: 4Last Post: 11-14-2004, 08:38 AM
Search Pretty Girls from your town for night
JeeHell FMGS on a remote Computer