Results 1 to 8 of 8
Thread: CNC Software
-
11-08-2011, 02:08 AM #1
- Join Date
- Nov 2011
- Location
- Mauritius
- Posts
- 19
CNC Software
Hi Everybody
could someone tell me where i could found a proper CNC software to buy any help on this side will be great
regards
marc
-
11-08-2011, 03:36 AM #2
Re: CNC Software
Hi Marc, I use VCarvePro6 from www.vectric.com in the UK. I highly recommend it for it's functionality and ease of use, it eliminates the need for using CAD and I also use it as a design platform. A little pricey but worth every cent! I use Mach 3 to drive my machine, also a simple interface.
Cheers Gwyn
Aerosim Solutions
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
11-08-2011, 04:02 AM #3
- Join Date
- Nov 2011
- Location
- Mauritius
- Posts
- 19
Re: CNC Software
Thanks a lot for your help Gwyn i will right away visit this web site for the soft if what so ever i will need help when finish building my cnc and installing the soft can i give you a call on the forum.
regards
marc
-
11-08-2011, 07:29 PM #4
Re: CNC Software
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
11-29-2012, 07:25 PM #5
- Join Date
- Oct 2009
- Location
- lelystad netherlands
- Posts
- 26
Re: CNC Software
Hello gwyn,
I am wondering... do i need to convert the files? to use them in mach3 after drawing in Vcarvepro 6
regards john
-
11-30-2012, 06:08 PM #6
Re: CNC Software
Hi john
Vcarve will convert the things you design into a Gcode which is what mach3 reads.
Sorry for jumping in there gwyn just saw this figued it was an easy one for me too answer,
Cheers
Riche.I Started with Nothing & ive still got loads left..
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
Westozy thanked for this post
-
12-01-2012, 04:27 AM #7
- Join Date
- Oct 2009
- Location
- lelystad netherlands
- Posts
- 26
Re: CNC Software
Hi riche,
found it and works tx.
I have one question if I made a design in Vcarvpro and save it for mach3 it seems that the design looks like a stamp in size and the CNC looks like working on the spot. I need a design 12.6 cm width and 8.6 cm height and the cnc makes it as big as a stamp ?
Am I mistaken ?
Solved
I needed to change the processorcode there are differend outputs for Mach3
regards johnLast edited by john van berkel; 12-01-2012 at 09:25 AM. Reason: Solved!
-
02-20-2013, 03:49 AM #8
- Join Date
- Mar 2009
- Location
- South Africa
- Posts
- 221
Re: CNC Software
I assume more than a year down the line this has been sorted?
hehehe
IF NOT - what i have found - using Aspire and VCarve - when i take an existing file and change the units i.e. from Inches to mm the scale is totally messed and I get what you have experienced. I haven't tried to carve this as you can pick up the discrepancy with the scale along left and top edges.
Prettys Womans from your city for night
A320 Sound Files Missing