Phidgets v.4.3.65 with Win 10

[Hugo]

Hello,
I am looking for help.
Everything works fine for me with W7 and FS2004.Now i am testing with Win 10 and P3D v 3.1 .
Everything is installed te same way as in W7 and when i start up the Phidgets Control Panel
it is not recognized, i mean the Phidget led 64 advanced serial number and version does not show up.

I have .Net 4.5
I can see the Phidgets Interface but when i start P3D v3.1 i get
Run time error 9 Subcript out of range .

What did i overlook?

Regards,
Hugo

[Hugo]

Hello,
I solved part of the problem .
I switched the usb from usb connection 3 to connecction 2.
Most new motherboard have more con 3 instead con 2.
The only problem is that P3D and Fsuipc don't show up in the Phidget Interface 4.3.65

Anyone familiar with P3d and the Inteface ?

Regards,

Hugo

[Hugo]

Hello again,
I upgrad with v 4.3.86 and indeed FSUIPC and P3d did show up.
In VARIABLE i did copy a IFLY737ini , BUTnow am stuck !

What is the right procedure to go on ?

Hugo

[CocnutAir]

Your card settings are stored in the Cards directory. You will need to copy those files from your W7 system to your win 10 system.

[Hugo]

Thanks for you quick reply.I posted a PM. I want to send a copy from my Phidgets Interface ,to check what is going wrong.

Thanks a lot,

Hugo

[Hugo]

Hello,
I found the solution another udate to v. 4393 .All seem to be OK.

Hugo

[Hugo]

Hi,
It seems i have another small problem.
Everything works fine with the USB plugged IN.
When i stop the PC and power off, restart PC , the Card is not recognized ,
until i plug out and plug in again ???

How come ?

Need some advise,

Hugo

[alleycat]

I sometimes have this problem with one or two cards. I use 18 cards. Sometimes have same thing with powered usb hubs. Not sure if this a genrral usb or phidget problem. For now I just live with it.

Hi,
It seems i have another small problem.
Everything works fine with the USB plugged IN.
When i stop the PC and power off, restart PC , the Card is not recognized ,
until i plug out and plug in again ???

How come ?

Need some advise,

Hugo

[alleycat]

I sometimes have this problem with one or two cards. I use 18 cards. Sometimes have same thing with powered usb hubs. Not sure if this a genrral usb or phidget problem. For now I just live with it.

I am assuming this also occurs on the Phidget Cosole (on the tray at bottom right in Win 7 - do not know where located, if at all, in Win 10)

[Hugo]

Thanks for the reply ,gave up research ,will have to live with it too.

Hugo