Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    10+ Posting Member
    Join Date
    Sep 2008
    Location
    Russia
    Posts
    10
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    First stage - drawings

    Ok, I've gotta get things moving on my future 767 pit. I decided to begin with 2d/3d modelling of what I want to get. I live in a small flat, which is rented, so obviously I don't have much room to build a complete shell. That's why I think I'm going for a wood-metal furniture-like cockpit that sometimes shows up at this site in the upper right corner. I chose bCAD - a software for furniture design, I think it has everything for this task. I want to design it the way, that some day when I have a garage or just much room I could build a shell around this structure. However I am stuck at the first step - which materials to choose? The overall "frame" structure is more or less clear, that could be 1,5 - 2 cm pressed wood like that used in computer tables. But what about the MIP? Should it be plywood, or better a piece of metal? What is the painting or covering technique for such wooden constructions? What about the overhead? Please, anyone who have setups similar to what I'm planning to make share your pictures and techniques you utilized. I will post the drawings as soon as I will be getting them. Thanks in advance!

  2. #2
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,881
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    I wouldn't use the pressed wood. It doesn't hold screws well along the edges, but it does glue easily. Though not a good idea if you have to disassemble it to move.

    Plywood is used by most home builders for the MIP stand. Some commercial products are made from steel or aluminum.

    Plastic, aluminum, and wood have all been used for the MIP.

    Wood is lighter than plastic, but heavier than aluminum for the same size sheet. Metal and plastic is harder to work with without the proper tools. Wood is easier to work but harder to finish, but can be made to look like aluminum with proper preparation.

    A laminate of .030" plastic over wood or .009 aluminum over wood is also a possibility if you'd rather not go to the trouble of preparing the wood for paint.
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  3. #3
    10+ Posting Member
    Join Date
    Sep 2008
    Location
    Russia
    Posts
    10
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    BSW, thanks a lot for the laminate hint!

    Regarding pressed wood - I thought of using it only for the box-like frame, connecting the pieces with those thick and long tightening screws without glue. That would allow to disassemble the structure easily, like plain furniture. Do you think solid wood would be better for that?

  4. #4

    Airbus

    4ever yup only use pywood bro press or particle board is crap. Like Michael said Plywood, and Sintra PVC plastic these are the best for what your doing. Also you can use textured Sintra PVC Board it cuts like plywood but has a beautiful finished look and comes in difft colors and textures.
    http://store.foamboardsource.com/sintra-pvc-foam.html

    Tim

  5. Thanks JSpahn thanked for this post
  6. #5
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,881
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Another possibility that is easy to work and finish is a Luan wood laminate over the plywood used for the MIP.

    Luan is typically used as underlayment over the subfloor before carpeting or tile is laid. It's very thin and light, but also very smooth with few imperfections.

    A couple of coats of body glaze and then sanded smooth and sealed with get a very slick surface.

    I'd use the plastic or aluminum laminate myself. A bit more work initially, but virtually no finish work required except a light sanding and primer coats.

    I was using the plastic laminate for a test MIP before I gave up and bought a real MIP. I had great difficulty getting the gauge cutouts in the correct positions.
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  7. Thanks JSpahn thanked for this post
  8. #6
    Heli Builder
    Join Date
    May 2008
    Location
    Earth
    Posts
    288
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by Boeing Skunk Works View Post
    Wood is lighter than plastic, but heavier than aluminum for the same size sheet. Metal and plastic is harder to work with without the proper tools. Wood is easier to work but harder to finish, but can be made to look like aluminum with proper preparation.

    A laminate of .030" plastic over wood or .009 aluminum over wood is also a possibility if you'd rather not go to the trouble of preparing the wood for paint.
    I have plywood pedestals which I need to paint cockpit green. The real PC9 has these pedestals made from aluminum. What would you recommend to do to get the painted wood look like it was painted over aluminum? In other words give it a metal feel? Or is it what you meant by a "a very slick surface"?
    Last edited by fweinrebe; 09-19-2008 at 10:47 AM. Reason: Saw possible solution later on in post

  9. #7
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,881
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    You can either use the fill and sand method described above if the grain is fairly tight, or you could laminate it with .009 aluminum roof flashing.

    You repeat the process of filling the wood grain and sanding using finer grits up to about 400-600 and then sealing the wood with a sanding sealer and finish sanding with 600.

    The aluminum laminate is a lot less work and gives you the real surface to finish.
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  10. Thanks fweinrebe thanked for this post
  11. #8
    10+ Posting Member
    Join Date
    Sep 2008
    Location
    Russia
    Posts
    10
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thank you all, off we go. Started drawing things, took Ian Cameron's tutorial as base. BTW, does anybody know if Ian ever finished or had any progress with his installation, his site does not work... Would highly appreciate if anybody showed me other pictures of his pit. Thanks in advance.
    Attached Images Attached Images

  12. #9
    150+ Forum Groupie andarlite's Avatar
    Join Date
    May 2007
    Location
    Mississauga, Ontario, Canada
    Posts
    260
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by 4EVERCooL View Post
    Thank you all, off we go. Started drawing things, took Ian Cameron's tutorial as base. BTW, does anybody know if Ian ever finished or had any progress with his installation, his site does not work... Would highly appreciate if anybody showed me other pictures of his pit. Thanks in advance.
    Yes, Ian did finished and has one of the nicest 767 cockpit that I have seen. If you join up with the 767homecockpitbuilder group on Yahoo, you can see pictures of his cockpit along with many others. Here's the link:

    http://games.groups.yahoo.com/group/...ckpitbuilders/

    Regards,
    Henry

  13. #10
    10+ Posting Member
    Join Date
    Sep 2008
    Location
    Russia
    Posts
    10
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thank you, andarlite!

    This helped me

Page 1 of 2 12 LastLast

Similar Threads

  1. drawings & dimensions
    By rodenhuis in forum Welcome to MyCockpit New here? Introduce Yourself!
    Replies: 4
    Last Post: 05-23-2010, 04:36 AM
  2. First stage of expansion of my 737NG Panel
    By bravolima in forum My Cockpit Update
    Replies: 4
    Last Post: 08-01-2008, 02:20 PM
  3. Drawings
    By nihad in forum General Builder Questions All Aircraft Types
    Replies: 9
    Last Post: 05-27-2008, 01:40 PM
  4. Sim 1 Stage 2
    By AndyT in forum My Cockpit Update
    Replies: 7
    Last Post: 12-19-2006, 11:13 PM