JeeHell Homecockpit & Vatsim/Ivao

[Fabiano2012]

Hi community, having built a homecockpit, we are looking for "as real as it gets". Now I like to try setting up communication with Vatsim/Ivao and actually have "no" idea how to start and how to do it. Could you help me out how you did it and what the correct steps are ? Thanks so much.

[asessa]

Vatsim and Ivao need to switch freq on your radio (hardware module or software module provided by JH setup)

[Fabiano2012]

Thanks asessa, this point i can cope up with, i do have a hardware radio from Skalarki. What are other settings or setups to be able to fly within the network of Vatsim/Ivao, other than downloading the pilot client software from these two ?

[capt_pero]

Hi Fabiano,

as you are from Germany it might be an easy one reading my documentation. I am flying with VATSIM (in former times use IVAO) and it works great with JH and Skalarki Hardware.
More Information: https://aviation.pero-online.de/wordpress/?p=1559

[asessa]

Thanks asessa, this point i can cope up with, i do have a hardware radio from Skalarki. What are other settings or setups to be able to fly within the network of Vatsim/Ivao, other than downloading the pilot client software from these two ?

Hi Fabiano, the only thing you have to do is configure the piloti client : - VATSIM , i use vpilot -> settings-> Audio- > choose Mic and Output device- IVAO, Altitude client -> Open Team Speak (installed with Altitude) -> Settings -> choose Mic and Output deviceRegards

[Fabiano2012]

Thanks for your replies, i will try to setup the communication with Vatsim / Ivao next days.

[Dan320]

Hi Fabiano,as you are from Germany it might be an easy one reading my documentation. I am flying with VATSIM (in former times use IVAO) and it works great with JH and Skalarki Hardware.More Information: https://aviation.pero-online.de/wordpress/?p=1559

Hi Peter, I am wondering how you configured the ptt in the Vatsim client since you can only select one ptt. Did you point the left and right PTTs onto a keyboard button via FSUIPC which you use as the vPilot PTT? Maybe i overlooked that in your example guide.Regards Daniel

[Fabiano2012]

Hi guys, is it possible to just install the pilot client (Vatsim or Ivao) without the MLT-stuff ? I want to use Ultimate Traffic Live and don´t need to see other Vatsim or Ivao traffic, just have a working Transponder and communication to ATC via JeeHell ?

[Space]

Hi Peter, I am wondering how you configured the ptt in the Vatsim client since you can only select one ptt. Did you point the left and right PTTs onto a keyboard button via FSUIPC which you use as the vPilot PTT? Maybe i overlooked that in your example guide.Regards Daniel

You can solve that with FSUIPC by select a common key for both lets say "F10" an let this one driven by both CS and FO Site PTTs input. In vPilot you have to select F10 then. Thats it.

[Space]

Hi community, having built a homecockpit, we are looking for "as real as it gets". Now I like to try setting up communication with Vatsim/Ivao and actually have "no" idea how to start and how to do it. Could you help me out how you did it and what the correct steps are ? Thanks so much.

I use VAT Sim with the vPilot. Also my Skalarki RMP and is full supported in changing the freq.