Results 1 to 4 of 4
Thread: PFD and ND show nothing
-
03-28-2018, 03:49 PM #1
- Join Date
- Oct 2014
- Location
- germany
- Posts
- 17
PFD and ND show nothing
hello together,
have B50 and everything works, but CP PFD & ND (run at networked PC) show only the lines and layout but no font (speed, course/hdg, altitude and so on).
GND POWER on / APU on, ADIRS 1-3 ALIGN... nothing happens. Also for FO PFD & ND.
I think that the networked PC not good enough (Windows XP with around 512/1024MB RAM) ... When i start the "STARTER" the application (EIS PFD & ND) needs around 5 to 10 minutes to start.
thanks for your help!
kind regards
tom
-
Post Thanks / Like - 0 Thanks, 0 Likes, 1 Dislikes
Anthony96 disliked this post
-
03-28-2018, 03:58 PM #2
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: PFD and ND show nothing
it seems you PC is really not good enough. Probably a mixed problem with CPU, RAM and Opengl version supported by your graphics adapter.
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
gleichi thanked for this post
-
03-28-2018, 04:13 PM #3
- Join Date
- Oct 2014
- Location
- germany
- Posts
- 17
Re: PFD and ND show nothing
thanks for your reply. i will test it asap on the Server-PC.
Another question: I have CP EFIS Panel from FSCockpit... did FMGS check that EFIS Panel for FO is missing? When i change range on EFIS it change at CP ND but not on FO ND. i installed then CP PFD&ND panels at the "FO-PC" but its the same. i check also the starter.ini that the right panel open but nothing happens, only at CPT-PC the range change.
thanks alot.
tomAirbus A320 Homecockpit
www.airbus-dresden.de
-
Post Thanks / Like - 0 Thanks, 0 Likes, 1 Dislikes
Anthony96 disliked this post
-
03-28-2018, 04:33 PM #4
- Join Date
- Mar 2008
- Location
- France,Nice
- Posts
- 2,652
Re: PFD and ND show nothing
I do not provide support for fscockpit.
-
Post Thanks / Like - 0 Thanks, 0 Likes, 1 Dislikes
Anthony96 disliked this post
Sexy Womans in your town for night
Run-Time Check # 0 - The value of...