İnstructor Station for JeeHell

[Hikmat]

Hi JeeHell and forum Guys

Many Thanks to JH for his fantastic software

I am sim engineer from Azerbaijan (full flight simulator engineer) now I trying to build Jeehell specified Instructor Station

which will be also able to perform some Quality tests (as Our full flight simulator ).

Those tests help sim to be certificated and to compare parameters to real aircraft

The IOS can be downloaded from link not fully functional yet

DOWNLOAD LINK:

http://bit.ly/1PEBwDN


Any helps will be appreciated

best regards

Hikmat

[OmniAtlas]

Hi Hikmat - this is a good start. Perhaps also implement a pause function as I believe the would be important before loading each state.

Also, the aircraft will need to be configured to the certain phase of flight when selecting approaches/takeoff, trimmed correctly, and throttle placed in the correct detent - can this be set with iOS?

it would also be good to be able to set the speed, altitude and heading of the aircraft.

[Hikmat]

Dear OmniAtlas ,

I am currently working on this (speed, trim and related parameters calculation during re-positions )

best regards

[Hikmat]

https://www.dropbox.com/s/u5rxzdbzx33air0/IOS.zip?dl=0

Added some functions such as re-positions to the 3 and the 7 mile.s All airports are available

and ground acceleration test has been added (After full power select run test button) will be added comparison data also

best regards

[Hikmat]

https://www.dropbox.com/s/u5rxzdbzx33air0/IOS.zip?dl=0


1. Added landing gear malfunctions,


2. Added engine fire, flameout malfunctions


3. Some internal bugs,


note: Only 3 miles, 7 miles, 12 miles repositions are available. r5 file shoul be in the same folder


with IOS.

[FSlikerX]

"please select airport UBBB , runway 35" My sim is P3D v3 with the latest FSUIPC Version. But I can only select runway 34 or 36 in P3D. Which one should I use?

[FSlikerX]

on runway 34 I get the follownig:

[Hikmat]

Then select 34 please , UBBB has no runway 36 any more, This is Azerbaijan airlines Airport, so try to select runway 34 from IOS not from P3D

regards

Hikmat

[FSlikerX]

Then select 34 please , UBBB has no runway 36 any more, This is Azerbaijan airlines Airport, so try to select runway 34 from IOS not from P3D

regards

Hikmat

alright. I placed my aircraft on runway 34 and selected final 3nm. But still get the error I already posted...

[Hikmat]

where is IOS located?