Home Made 737 CDU/FMC

[Hellbringer]

Has anyone home built a CDU/FMC for the 737. Most of the cockpit builds that i see people buy them and i have found how to wire them up because you can buy them as a kit but i have not been able to find someone that has built one from the ground up.

Now as someone that is quite tech savvy i am ok on the wiring and sourcing the parts for the electrical side the one that i dont know how to do is make the buttons (keys) and i dont think they are something that you can just buy so any information on how to make the buttons or where to buy them would be great

thanks
Mike

[GPreddy]

Mike,

Here you go: http://www.hispapanels.com/tienda/in...duct&id_lang=1

It is a kit with all the panels and buttons already cut and painted. You can also have the company include the electrical components if you want.

Good luck!

Steve

[slocs]

Mike & Steve,

I've just purchased the Hispapanel FMC kit, with all buttons etc, and last week my 5 inch LCD arrived from China (http://www.good-display.com/products...ist01-004.html) - it's a perfect fit for the Hispapanel cut out, and runs off a VGA input.

So I reckon for about $150 (and a bit of soldering) I'll have a fully functional FMC...

Regards

Rob

[Masterploxis]

Hello,

check my DIY Build: http://lowtone.de/wordpress/?page_id=315

If you need dxf file, let me know.

Cheers
Andy

[superman32870]

I have just successfully interfaced my FMC/CDU using a PIC18F4550. Took a while to figure it out. Anyone interested, just let me know.

Chris

[RadarBob]

Hi Chris,

I would be most interested to hear about your work on that - I'll send you pm.

Best Regards,

Rob

[Geremy Britton]

We've got an FMC kit in in our pre-owned visitors retail section at GLB Flight Products if anyone's looking around.

[GMan1957]

Hi Chris

If the offer still stands to anyone -- I'd love the dxf file of your FMC and anything else you may in the build --

Thank You John jgarrett123@hotmail.com

[fanis]

Hello,

check my DIY Build: http://lowtone.de/wordpress/?page_id=315

If you need dxf file, let me know.

Cheers
Andy

hi could you sheare with me your fmc files? fanis_katmadas@yahoo.gr