Results 1 to 3 of 3
Thread: Macro address 0D70
-
01-12-2011, 12:04 PM #1
- Join Date
- Jan 2009
- Location
- Belgium
- Posts
- 61
Macro address 0D70
Hi I've been using phidgets with real studio and decided to start with the opencockpit cards and there for need to use the SIOC. And i'm stuck with the following. To use macro I use to address 0D70, 40 lengte. How do i use the macro name. ex "ATR Overhead:eng start 2" in the SIOC file.
thanks,
henri
-
01-12-2011, 12:41 PM #2
- Join Date
- Jan 2007
- Posts
- 496
Re: Macro address 0D70
If the SIOC programming facilities don't let you send strings, then the best answer would probably be to use the "virtual button" facilities instead. Get SIOC to set, clear or toggle a bit in the virtual buttons offsets (you can have up to 288 distinct buttons) -- offsets 3340 - 3363, 36 bytes of 8 bits easch = 288 buttons.
Then you assign the button in FSUIPC to excecute the macro.
You can use this technique for most things -- it makes it a little easier to be flexible, and allows you to more easily take advantage of FSUIPC's aircraft- or profile-specific assignments for variations between aircraft types.
Regards
Pete
-
01-12-2011, 01:30 PM #3
- Join Date
- Jan 2009
- Location
- Belgium
- Posts
- 61
Re: Macro address 0D70
Hi Pete thanks for our replay. After i placed the question I thought about the offset 3340, and i'm already using them.
Thnx. henri
ps: your work is great and thank you for all that
Similar Threads
-
Change SIOC server address?
By nax228 in forum I/O Interfacing and HardwareReplies: 2Last Post: 01-03-2011, 05:54 AM -
FSUIPC Address for the Test Button on the Overhead Panel
By 388TH_A in forum I/O Interfacing and HardwareReplies: 16Last Post: 12-08-2009, 12:12 PM -
Sever Address
By Bob Reed in forum MyCockpit Online Flying DiscussionReplies: 2Last Post: 05-23-2007, 10:35 AM -
Server address
By Bob Reed in forum MyCockpit Online Flying DiscussionReplies: 0Last Post: 05-11-2007, 12:55 PM
Prettys Womans from your city for night
A320 Sound Files Missing