Results 1 to 6 of 6
-
12-27-2006, 02:52 PM #1
- Join Date
- Dec 2006
- Location
- Chicago
- Posts
- 6
Monitor size for PFD, MD, EICAS and computer type.
I was wondering what is the best monitor size for Project Magenta's PFD, MD and EICAS. I am also going to purchase $299 computers for this set-up. How many do I need and what size monitor.
Thank you,
-
12-27-2006, 06:09 PM #2
- Join Date
- Oct 2005
- Location
- Holley, New York U.S.A.
- Posts
- 1,776
Hello APOPilot. The question you ask is not an easy one to answer. Monitor size is going to depend on what you plan to do for a MIP. I think a 19" wide LCD would work for Pilot's and FO's and a 15 -17 standard for the EFIS. Now computers, PM does no take a lot of horsepower to run BUT!!! It does need completly Open GL compaitable! Nvidia is probably your best bet. The best thing would be to see if you could run the demo on one of the machines you plan to purchase and see how it works.
Bob Reed
-
12-28-2006, 03:36 AM #3
I am using 2 19" Wide TFT by ACER (1916W - Wide) for the Pilot and Copilot PFD/ND an HP 15" for the Upper Eicas and a 10.4" LCD TV with a VGA input for the lower EICAS.
But all depends on how yor MIP is Build.
Chris
-
12-28-2006, 09:45 AM #4
- Join Date
- Dec 2006
- Location
- Chicago
- Posts
- 6
I am starting to build a 737NG from FDS. I would like to start off with these basic computers and have a mock set-up before the FDS flightcenter arrives. However, I want to make sure I have the right monitors.
Thank you,
Abe
-
12-28-2006, 10:16 AM #5
I think Chris's set-up is pretty close...
This is a very difficult thing to do... making assumptions before you have the panels... I've been there... more then once.
I suggest, as Chris... use 19" for the Cpt and F/O. For the Eicas, temporarily use another 19". Once you have the Eicas panel you'll know exactly what you need. If you decide to use other monitors for the Eicas, I'm sure you'll find a use for the extra 19", such as a Instructor Station
Since you're using FDS MIPS, and if you've got them ordered, check with Peter Cos for measurements, I'm sure he'll give them to you.
-
01-06-2007, 02:33 PM #6
Just a note seeing Chris post on Acer monitors. These have been very successful in the sim community and come highly recommended.
I see that TigerDirect has them on sale for $159.99 after $50.00 rebate.
http://www.tigerdirect.com/applicati...&Sku=A179-1928
Similar Threads
-
which size monitor
By 777 in forum Cockpit Outside VisualizationReplies: 2Last Post: 09-05-2008, 05:40 PM -
Using PM PFD/ND and EICAS on one Computer
By chrisdanker in forum PM Boeing GCReplies: 5Last Post: 01-03-2008, 08:13 PM -
monitor size
By bravolima in forum Where to Start Building a Home CockpitReplies: 1Last Post: 10-27-2007, 02:10 PM -
monitor size
By Mr. Midnight in forum Where to Start Building a Home CockpitReplies: 5Last Post: 03-09-2007, 10:52 PM
Womans in your city for night
JH startup on Client PC