Results 1 to 4 of 4

Thread: Buo386X

  1. #1
    150+ Forum Groupie Drewsta's Avatar
    Join Date
    Oct 2007
    Location
    Australia
    Posts
    206
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Buo386X

    Hi guys, can you run more than 1 buo836x card on 1 computer or will it double up on the button assignments? Also if I want to hook up my leds to a 5 volt on the card, can i hook them all up to the same 5 volt and ground on the card in some way?

    Cheers
    Drewsta

  2. #2
    75+ Posting Member
    Join Date
    Dec 2006
    Location
    Israel
    Posts
    126
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Buo386X

    You can attach more then one BU386x cards to same pc
    As to leds , i would do that ,only using Usb hub with external power supply

    Joseph

  3. #3
    500+ This must be a daytime job ian@737ng.co.uk's Avatar
    Join Date
    Jan 2006
    Location
    Oswestry, Shropshire
    Posts
    604
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Buo386X

    hi drewsta......
    no worries with hooking up several X cards to one PC. i have 6. each one has a seperate serial no./ID, so your OS will see them as different controllers.
    re: the 5v connection for the LED's, i would suggest using a seperate supply like from a computer power supply because we all get adventurous
    and there's only so much juice available thru the card and your USB bus.
    good luck ...
    rgds ... ian
    Mr. Ian. P. Sissons is hereby recognised as an Honorary Flight Sim Captain following his passing in February 2016. This is in recognition for his commitment to Flight Simulation.

    www.mycockpit.org Featured Builder August 2008 www.737ng.co.uk
    FS9/PROSIM737/CPFLIGHT/Lots of BU0836X's and a Beer Fridge

  4. #4
    150+ Forum Groupie Drewsta's Avatar
    Join Date
    Oct 2007
    Location
    Australia
    Posts
    206
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Re: Buo386X

    Quote Originally Posted by ian@737ng.co.uk View Post
    hi drewsta......
    no worries with hooking up several X cards to one PC. i have 6. each one has a seperate serial no./ID, so your OS will see them as different controllers.
    re: the 5v connection for the LED's, i would suggest using a seperate supply like from a computer power supply because we all get adventurous
    and there's only so much juice available thru the card and your USB bus.
    good luck ...
    rgds ... ian
    Thanks for the replies, that all makes sense. Instead of attaching all the led wires to the end of the little red wire, is there some sort of strip or rail i can attach all the seperate wires to, then attach that to the red wire? Same with ground?

    Drewsta

Similar Threads

  1. Buo386X and led pushbuttons?
    By Drewsta in forum I/O Interfacing and Hardware
    Replies: 3
    Last Post: 09-20-2010, 01:05 PM