ECAM Switcher here

[marcello3wd]

Hi Jeehell

First of all thank you very much for your monumental work done with this software.


I would like to contribute a "grain of sand" with this ECAM switcher, is "freshly baked" and needs to be tested, it communicates with FSUIPC so HardwareConect is required in starter.ini

(there are two mini buttons in the corners to show/hide the borders)


I hope you like it


Best Regards

Marcello Migone

[Vonduck]

Hi Marcello,

What a great switcher! I love it! Excellent program and worked without a hitch!

Couple of things -

1. How do i resize the panel?
2. How do i get it to start automatically along with the other gauges and save its position?

This is excellent stuff my friend

Thanks for doing this!

Regards

Doug

[OmniAtlas]

Thank you for this application Marcello, I will give it a test when I get back from my Christmas holidays.

Are you planning to release other modules (gear panel, pedestal)?

These functions ons would be greatly appreciated for us that want to run 2d panels on a touch screen.

Best regards.

[marcello3wd]

Thank you Doug for your comments

Regarding your questions:

1.-For now the switcher can not be resized (I will work on that)
2.- You can start the switcher automatically adding in the starter.ini the appropiate instruction to run external programs, see the example in the bottom of the file.
3.- For now is not possible to save the position in the screen

Regards

Marcello

[marcello3wd]

Thank you OmiAtlas, I would like to make the gear/autobrake panel and a radio panel for this fabulous bird

Best Regards

Marcello Migone

[OmniAtlas]

Thank you OmiAtlas, I would like to make the gear/autobrake panel and a radio panel for this fabulous bird

Best Regards

Marcello Migone

Hi Marcello, thank you. That is excellent news. With your panels I will be able to setup a touch screen simulator using jeehells software. Regards.

[OmniAtlas]

I am back home now from my holidays and have been able to try out the new ECAM switcher, it works!

An option to resize would be fantastic. Thank you for your contribution.

I have tried to add ECAMSWITCHER=yes to starter.ini but it will not autostart; is there another option I should be using? Thank you again.

[SSO]

I am working on a gear autobrake panel. I have it operational and connected to FMGS via EHID (see below). Just a few bits to sort out with the distribution and initialization before first release.

A320GearpanelSSO.jpg

Next on my list was actually the ECAM switcher, the CPT glare and the ATC module.

[OmniAtlas]

Excellent Stephen! Looking forward to your release. Thank you.

[marcello3wd]

Hello All

Coincidentally I also developed Auto Brake and Landing Panel (attached to this post), for some reason the light for ON DECEL (offset 7393, byte 5) is not working.

Also I replaced the Brake Fan button with Landing gear switch (I believe the Brake Fan is not modeled)

Best Regards

Marcello Migone