Results 1 to 2 of 2
Thread: SIOC script
-
05-08-2013, 03:53 AM #1
- Join Date
- May 2013
- Location
- United Kingdom
- Posts
- 6
SIOC script
Hello everyone
,
I have the Open cockpits USB stepper motor card, a stepper motor, an optical switch and a slide potentiometer. However i was wondering if you could help me in generating a SIOC script for the motion platform i have created as shown below (the stepper motor connected at the end of the ballscrrew is not shown).
Attachment 7839
I have the linear slide potentiometer to ensure that when i restart FSX, the ballscrew goes back to its starting point. A general description of how I want it to work is given below:
1) If the airspeed is2) If the airspeed is >160 but less than 230, the stepper should turn 180 degrees x6 times.
3) If airspeed is >230 but less than 400, the stepper should turn (270degrees more than the previous one)
4) While taxiing and just before landing, the stepper motor should turn (180degrees x 12times)
5) When Fsx restrats, rotate the stepper motor (anti-clockwise), so that potentiometer value goes back to zero.
I know there is a conflict between statement 1 and 4, but my stepper motor is attached to a linear platform with springs. The more the number of turns, the longer the spring expands and harder it becomes to move the rudder pedals. I hope you understand what I require to simulate. I m new to sioc, so any help whatsoever would be greatly appreciated. Thank you.
Sincerely,
Akhil
-
05-08-2013, 09:29 AM #2
- Join Date
- May 2013
- Location
- United Kingdom
- Posts
- 6
Re: SIOC script
Hello everyone
,
I have the Open cockpits USB stepper motor card, a stepper motor, an optical switch and a slide potentiometer. However i was wondering if you could help me in generating a SIOC script for the motion platform i have created as shown below (the stepper motor connected at the end of the ballscrrew is not shown).
I have the linear slide potentiometer to ensure that when i restart FSX, the ballscrew goes back to its starting point. A general description of how I want it to work is given below:
1) If the airspeed is
2) If the airspeed is >160 but less than 230, the stepper should turn 180 degrees x6 times.
3) If airspeed is >230 but less than 400, the stepper should turn (270degrees more than the previous one)
4) While taxiing and just before landing, the stepper motor should turn (180degrees x 12times)
5) When Fsx restrats, rotate the stepper motor (anti-clockwise), so that potentiometer value goes back to zero.
I know there is a conflict between statement 1 and 4, but my stepper motor is attached to a linear platform with springs. The more the number of turns, the longer the spring expands and harder it becomes to move the rudder pedals. I hope you understand what I require to simulate. I m new to sioc, so any help whatsoever would be greatly appreciated. Thank you.
Sincerely,
Akhil
Search Pretty Womans from your city for night
New Version of UPDNAV for Jeehell...