Results 1 to 5 of 5
Thread: PFD+ND initial problems.
-
12-03-2008, 05:00 PM #1
- Join Date
- Oct 2007
- Location
- Brasil
- Posts
- 7
PFD+ND initial problems.
Hi all
I have two (simple, or maybe stupid) quetsions.
Iīm new on PM and like to know how I make two things.
1) How to start the PFD (GC _PMagenta) with the F4 (pfd+nd) screen.
Every time I start the PFD itīs start with the F1 screen (only pdf).
2) How I move or disable the three bottons (Next, exit, normal graphics)
on the top of the screen.
Iīm using the upper side of my LCD monitor and the bottons are placed
on the graphics (PFD).
Thanks in advance (and sorry for my poor english)
Carlos_Custodio
-
12-04-2008, 07:53 AM #2
- Join Date
- Dec 2007
- Location
- australia
- Posts
- 49
Hey Carlos,
I believe you are using the demo version?
1) You cant set the page setting using the demo. It will always go to that page by default, because you are using the demo
2) The 3 buttons, is also related to the demo , the registered version do not have this.
-
12-04-2008, 11:37 AM #3
- Join Date
- Oct 2007
- Location
- Brasil
- Posts
- 7
Hi
My PM is a old version of a friend that upgrade PM for a new version.
Itīs a old one but when selected to the correct screen run perfectly.
But, if itīs a demo, I can buy a new one..... or use one like FreeFD. Itīs only for flying on my free time. PM is excelent but so expensive only for it.
Thanks a lot,
Carlos.
-
12-04-2008, 04:56 PM #4
Carlos,
If you are using a version given to you by a friend, you probably dont have the licence required to make it run in other than demo mode - to do that check the PM site www.projectmagenta.com for pricing and licencing info.
-
12-04-2008, 07:10 PM #5
- Join Date
- Oct 2007
- Location
- Brasil
- Posts
- 7
Similar Threads
-
Some initial questions - Could you offer some answers please experts!
By darrenw in forum Where to Start Building a Home CockpitReplies: 4Last Post: 02-22-2011, 04:57 PM -
Problems with PM CDU
By vybhav in forum PM Boeing FMC/CDUReplies: 1Last Post: 10-02-2010, 12:33 AM -
OC Radios... Preset of Standby Initial Values ???
By Nick1150 in forum OpenCockpits General DiscussionReplies: 2Last Post: 09-29-2010, 03:58 PM -
Potential buyer: VNAV problems, A/P problems?
By 737aqua in forum PM General Q & AReplies: 13Last Post: 04-26-2008, 09:21 PM -
B757 Initial Planning Stages
By covewatcher in forum Where to Start Building a Home CockpitReplies: 7Last Post: 03-17-2008, 06:08 PM
Pretty Girls from your city for night
Generic Analog Gauges