PFD and ND show nothing

[gleichi]

hello together,

have B50 and everything works, but CP PFD & ND (run at networked PC) show only the lines and layout but no font (speed, course/hdg, altitude and so on).
GND POWER on / APU on, ADIRS 1-3 ALIGN... nothing happens. Also for FO PFD & ND.

I think that the networked PC not good enough (Windows XP with around 512/1024MB RAM) ... When i start the "STARTER" the application (EIS PFD & ND) needs around 5 to 10 minutes to start.

thanks for your help!

kind regards
tom

[jeehell]

it seems you PC is really not good enough. Probably a mixed problem with CPU, RAM and Opengl version supported by your graphics adapter.

[gleichi]

thanks for your reply. i will test it asap on the Server-PC.

Another question: I have CP EFIS Panel from FSCockpit... did FMGS check that EFIS Panel for FO is missing? When i change range on EFIS it change at CP ND but not on FO ND. i installed then CP PFD&ND panels at the "FO-PC" but its the same. i check also the starter.ini that the right panel open but nothing happens, only at CPT-PC the range change.

thanks alot.
tom

[jeehell]

I do not provide support for fscockpit.