3 projector with TH2GO

[Kareem Hizam]

hi guys

I want some help to chose projector model which support 1280x1024, please advice me depanding your tested hardware and experiance.

Also I'm looking for curved screen where i can get it?

Kareem Hizam
Best Regards,

Posted via Mobile Device

[aviaparts]

Hi,

Why do you want to use that resolution ? I would suggest using any resolution at or above XGA but all in a 4:3 format. This is the default resolution for most projectors. I use my projectors in 1024x768 mode with FS in 1600x1200.

I would also not advise you to use a curved screen, it is way easier to use 3 equal screens with a little angle, keep in mind that using TH2GO, you only stretch the front image over 3 screens. Si higher angles are not realistic.

If you do want to go into curve, you will need aditional software or loose sharpness.

[Philb737]

My Two Cents
I have 4 Canon Realis SX50 Projector HD,, they work great!!!
http://www.zalmar.com/detail-Video-P...ealis_SX50.htm
I have a 220dg Spherical Projection Screen from: northernflightsim !
http://www.northernflightsim.com/projectionscreen.shtml
and to make it all work I'm using Sol7 software and wideview!!!!!
http://immersaview.com/sol7.html
Good luck!

[Kareem Hizam]

Thank you guys for this information, in fact i don't have main reason for chose 1280x1024 but i don't want to spend more than $1000 for each projector i found Canon Realis SX50 Projector great solution but it's costly, can you help me please to chose the projector on my budget ??

Thank you

[Swiss1673]

Hey Phil

Do you have any Photos of your Homeinstallation with the Spherical Projection Screen? Personally im interested to see a inside View to the Screen. It cost a lot...3300$ for the 150 degrees and i'm not pretty sure....

Daniel

[Swiss1673]

Thank you guys for this information, in fact i don't have main reason for chose 1280x1024 but i don't want to spend more than $1000 for each projector i found Canon Realis SX50 Projector great solution but it's costly, can you help me please to chose the projector on my budget ??

Thank you

Benq 771 is a nice one.... Good Short Throw and more or less in your Budget....1200$

[sas550]

I use my projectors in 1024x768 mode with FS in 1600x1200.

Hi! I might be missing something here but if your gfx adapter runs in 1024/768 and fs is set to 1600/1200 there has to be a downscale since fs changes the resolution for the gfx adapter when started. So the projectors have to downcale to native resolution.

I have checked the difference between higher res (not 1600/1200 though)and native res on my projectors by standing next to a taxi sign. The text was absolutely most clear and readable with fs in the same res as the native res for my projectors 1024/768.

Would be interesting to here your result in a situation like that. Maybe downscaling from a 4:3 to another 4:3 resolution doesn't take the same hit (blurr) as downscale from 16:9 to 4:3. But you still don't get more pixels on the screen than your projectors native resolution.

[Philb737]

Daniel ,
Be careful what you ask for-- you might get it! It wasn't easy flying with a joystick and videotaping at the same time! Enjoy
http://www.youtube.com/watch?v=YozLHBfSf3M

[paulj]

Nice video,
your screen looks great.
Paul

[Swiss1673]

Thanks a lot for making the Video! Very impressive Now im a step forward in my descision...

Thanks again!!
Daniel