Results 1 to 10 of 11
Thread: Equipment for CNC
-
11-14-2011, 07:06 AM #1
- Join Date
- Nov 2011
- Location
- Mauritius
- Posts
- 19
Equipment for CNC
Hi Everybody,
could anyone give me the places where i could get the stepper servomotor either in europe or china dealers and also the watt average used for the CNC machine and also all materials like rods etc..
regards
marc
-
11-14-2011, 01:27 PM #2
- Join Date
- Jan 2007
- Location
- Netherlands
- Posts
- 201
Re: Equipment for CNC
Hi Marc
Try this site: http://www.damencnc.com/
They have all you need
best regards
Jan Geurtsen
-
11-15-2011, 02:14 AM #3
- Join Date
- Nov 2011
- Location
- Mauritius
- Posts
- 19
Re: Equipment for CNC
Many thanks for your help jan i willhave a look today
regards
marc
-
11-15-2011, 02:48 AM #4
Re: Equipment for CNC
And as a bonus DamenCNC will answer your questions concerning the build of your machine.
Regards, Wendyhttp://www.flightsimparts.eu
PoKeys interface cards
-
11-15-2011, 03:07 AM #5
- Join Date
- Nov 2011
- Location
- Mauritius
- Posts
- 19
Re: Equipment for CNC
thank you very much Wendy
-
11-15-2011, 05:02 PM #6
Re: Equipment for CNC
I got my motors & drivers from these guys, had no problems with the order from eBay with them communication was great & postage was faily quick. & I'm happy with the products.
http://stores.ebay.com/Wantai-Electr...pliance-Co-Ltd
Cheers
Riche.I Started with Nothing & ive still got loads left..
-
11-16-2011, 01:39 AM #7
- Join Date
- Nov 2011
- Location
- Mauritius
- Posts
- 19
Re: Equipment for CNC
Thanks a lot riche
-
11-16-2011, 04:46 AM #8
- Join Date
- Nov 2011
- Location
- Mauritius
- Posts
- 19
Re: Equipment for CNC
Hi i wanted to know the proper oz for me to start cutting cockpit panels as i saw on the web site that riche gave me and before i do order for me to get the proper servo motor. also if whatsoever i want to cut MDF wood also
regards
marc
-
11-16-2011, 11:23 AM #9
Re: Equipment for CNC
Hello Marc,
I’m using this controller-kit from HobbyCNC.com and added two 305oz steppers
(#23-305-DS8A) from the same company as my X and Y steppers. For Z axis
you can use a smaller stepper. I have a few on the shelf from some old printers.
The Power Supply you can build yourself if you like.
About the controller; it’s smart to pick one with four channels – X, Y & Z plus
one extra (A) for running an index wheel (makes the difference in many
operations like knobs, round and none planar items) or as a channel in
spare if one blows
Everything performs very well for normal “cockpit” operations.
Take your time and plan well. I used Cnczone a lot during the planning / building phase.
Now I'm visiting more often sites like: Cnc-Plus and Sorotec .
Anyway - good luck with your CNC project – you’ll never regret
and ask questions & search the forum. There are many CNC owners
in here and a lot of experience - some have build their own,
others running ready made units.
Bottom line is your own ability & resources and of course the bank account
-
11-16-2011, 11:30 PM #10
Re: Equipment for CNC
I bought the 425oz package with drivers, breakout board & power supply. There prices are good too.
I Started with Nothing & ive still got loads left..
Prettys Womans from your city for night
A320 Sound Files Missing