A320 FMGS B41

[jeehell]

Hi all,

The B41 is available from the auto update and download.
!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!
-IMPORTANT: this version no longers support FS9. Only FSX and P3D are supported from now on. This is due to limitation in the features available in FS9, it's becoming increasingly hard to keep perfect compatibility.
!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!
-Corrected and enhanced the brake temperature system.
-Enhanced the joystick axis assignement in FMGS config. You can still select as before (auto detect) or choose from a list of all available axis.
-Added joysitck initialisation "protection": until a joystik is moved, it is assumed its axis are in their neutral/normal position.
-Corrected ANN LT DIM FSUIPC offsets
-Added MCDU ATCOMM key offsets (compatibility with Chris Paulus CPDLC add on only).

http://www.jeehell.org/A320FMGS_B41.1.exe

Best regards,
Jean Luc

[OmniAtlas]

Thank you JL -- I will test out the new brakes, and brake temperature implementation.

Is the braking with the effects of variables - wet/dry runway/FOB/reverse thruster/autobrake selection operations fully simulated?

[jeehell]

I reworked the temperature model only.
This model takes into account GW, wind speed, pressure altitude, OAT and brake application. It is not a brake system i.e. runway state has no effect on it.

JL

[OmniAtlas]

Good to hear JL. I am having strange readings with the brake temperature after T/O -- they hover around 170 degrees C, and they flicker between lower temperatures. Temperatures remain elevated for the whole duration of the flight, and even after landing.

Screenshot attached --

[tcane]

Hallo Jl and Guys,
my Problem with the F/O RMP still be there and i didn´t know where is the problem. I do not want you too nervous but I do not know further.

I use the following Dual Encoder from ALPS: EC11EBB24C03 Didn´t really know which type of Encoder is it in the SIOC-Creator!?!?!
The SIOC Monitor scanning this two Inputs when i turn the knobs. You can see it in this Video!

After this i´ve wrote the following things in the F/O RMP in the SIOC-Creator:

FO KHz:
Encoder first Input: 282
Encoder Device: 1
Acceleration: 1
Direction: -1
Type: 2

FO MHZ:
Encoder first Input: 280
Encoder Device: 1
Acceleration: 1
Direction: -1
Type: 2

Is there maybe a Problem with the CPT. RMP from Cockpitsonic and EHID and the combination of EHID and SIOC makes a Bug? But why i can´t set then the frequencies of the RMP2 solo? The Transferbutton works. I think it´s better when i explain it in this second short Video.

I hope anybody can help me out with this.
Thank you in advance.

King Regards
Florian

[Leonidas]

Good to hear JL. I am having strange readings with the brake temperature after T/O -- they hover around 170 degrees C, and they flicker between lower temperatures. Temperatures remain elevated for the whole duration of the flight, and even after landing.

Confirm this, but around 60-65 degrees

[Miatanet]

Hi JL,

did the latest update but still have the problem with the parking brake which is not sending the status to fsx somehow. It worked on v39. That is real strange. I know Marcin had two updates aswell, which I also updated. Do you have a clue what may have changed there? Using IO profiler of Marcin and his hardware, it is showing the right status on the ECAM screen. How can I check if the io profiler is sending the right status to your software?

Thank you for a short feedback.

Best regards
Stefan

[Fritz]

I have a problem with the assignment of the IR Mode Selector switch in SIOC Creator. The IR Mode Selector has 3 positions. In SIOC Creator is only a left and a right position available. What is the assignment meant because I cannot align IRS2 and IRS3.


The height is not automatically adjusted when the autopilot is active on the CPFlight module. Should I therefore update from Fimware 115 to 116?


With Release 4.1 in ITTCreator the switch assignments of the ECAM Panel for ALL and ENG seems to be reversed?

[yaarslan]

Mr. Jeehell,


1-Simulator that is installed on my main computer I installed with A320 FMGS FMGS Server and Sound.
I put 2-Aerosoft Airbus X AIRAC 1508 navdata1 and navdata2 within the copy-paste form.
3-second A320 FMGS my computer was installed in the normal way.
Network connection was established.
4- Battery, APU and ADIRS started.
All indicators show a full 5-successfully.
6. MCDU "active nav data base" and "second NAV data base" to "0000".

[OmniAtlas]

Mr. Jeehell,


1-Simulator that is installed on my main computer I installed with A320 FMGS FMGS Server and Sound.
I put 2-Aerosoft Airbus X AIRAC 1508 navdata1 and navdata2 within the copy-paste form.
3-second A320 FMGS my computer was installed in the normal way.
Network connection was established.
4- Battery, APU and ADIRS started.
All indicators show a full 5-successfully.
6. MCDU "active nav data base" and "second NAV data base" to "0000".

As JL has also said previously -- why are you using an Aerosoft Airbus X airac? You need to install the Aerosoft Navdatapro software which you can purchase and install from here - http://en.shop.aerosoft.com/eshop.ph...nguage=english

Once that is installed you need to select the Jeehellware AIRAC.

You can also buy one month navdata at a reduced price. Once you install the nav data your MCDU issues will be resolved.