Page 1 of 2 12 LastLast
Results 1 to 10 of 18
  1. #1
    300+ Forum Addict


    brianwilliamson's Avatar
    Join Date
    Oct 2005
    Location
    Gold Coast-AUSTRALIA
    Posts
    455
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Airbus radio stack.

    Have successfully used IOCards to do the complete Airbus radios.
    If anyone requires the script for this, please let me know. All you will need to do is fill in the numbers of your switches/leds/rotaries and you should be running in minutes.
    One problem I had originally that it would not function 100 percent on the networked computer, so I then loaded it to the FSX computer and away it went properly.


    Cheers.........................Brian W.
    Last edited by Matt Olieman; 02-06-2009 at 08:15 AM.

  2. Thanks Jordan Farmer, NigelD, Matt Olieman, Melnato thanked for this post
  3. #2
    300+ Forum Addict



    Join Date
    Jan 2009
    Location
    Tampa
    Posts
    487
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hi Brian,

    That is great news, I will be using the same setup I hope. I saw your forum post on the OC site, wondered where you left off with the problem... Are you still using the IOcards software or have you moved to SIOC? I ahve been playing with the IOcards software, but have not ventured into SIOC at all. Also, what is your scheme for the whole number/decimal number rotary setup? Are you using dual concentic rotary encoders or a single and then a pushbutton to toggle the single rotary function?


    Buddy

  4. #3
    300+ Forum Addict


    brianwilliamson's Avatar
    Join Date
    Oct 2005
    Location
    Gold Coast-AUSTRALIA
    Posts
    455
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Still using IOCards software, and using dual concentric encoders. It is a fairly simple system, and I have not as yet ventured into SIOC !!
    It will do the job adequately for the radios so I would stick with this way of doing it. Will try the Transponder shortly and get it running as well off the same system.
    Brian W.

  5. #4
    75+ Posting Member skalarki's Avatar
    Join Date
    May 2008
    Location
    united kingdom
    Posts
    83
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Great job Brian,

    Shortly I will be dooing my radios and expander panels as well. So your experience will be really helpfull and when I am ready will ask you for script.

    Thanks

  6. #5
    Executive Vice President, MyCockpit


    Matt Olieman's Avatar
    Join Date
    Oct 2005
    Location
    Ocala, FL USA
    Posts
    2,883
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    NICE JOB Brian..... as always Extremely impressive.

    Matt Olieman

  7. #6
    75+ Posting Member



    Join Date
    Mar 2009
    Location
    boston ma
    Posts
    86
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    brian looks great i would be interested in looking at the script to get some ideas as im new to this and will not be using the sioc language as well

  8. #7
    300+ Forum Addict


    brianwilliamson's Avatar
    Join Date
    Oct 2005
    Location
    Gold Coast-AUSTRALIA
    Posts
    455
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    IOCARDS CONFIGURATION...........A320 RADIO-------------BRIAN W
    _____________________

    VARIABLES
    =========
    Name Address Length Function Initial Value
    ____ _______ ______ ________ _____________
    LIBRE $3210 1 1
    DIS_COM_SB $311A 2 COM 1800
    DIS_NAV1_SB $311E 2 NAV 800
    DIS_COM2_SB $311C 2 COM 1800
    LIBRE2 $3211 1 0
    LIBRE6 $3215 1 0
    R_COM_SB $311A 2 COM 1800
    R_NAV1_SB $311E 2 NAV 800
    R_COM2_SB $311C 2 COM 1800
    SWAP $3123 1
    COM1_AC $034E 2 COM
    NAV1_AC $0350 2 NAV
    COM2_AC $3118 2 COM
    LIBRE4 $3213 1 0
    LIBRE5 $3214 1 0
    DIS_ADF $034C 2 ADF1
    R_ADF $034C 2 ADF1 356
    DIS_TXP $0354 2 SQW
    R_TXP $0354 2 SQW 1200
    DIS_NAV2_SB $3120 2 NAV 900
    LIBRE3 $3212 1 0
    R_NAV2_SB $3120 2 NAV 900
    NAV2_AC $0352 2 NAV
    FS_COM1_SND $3122 1
    FS_COM2_SND $3122 1
    FS_BOTH_SND $3122 1
    FS_NAV1_SND $3122 1
    FS_NAV2_SND $3122 1
    FS_MKR_SND $3122 1
    FS_DME_SND $3122 1
    FS_ADF_SND $3122 1

    SW-NORMAL
    =========
    Name N.Input Variable Value_ON/Key Value_OFF/Key Type
    ____ _______ ________ ____________ _____________ ____
    COM1A 5 LIBRE 1 P
    COM1B 5 LIBRE2 0 P
    COM1C 5 LIBRE6 0 P
    NAV1A 0 LIBRE 0 P
    NAV1B 0 LIBRE2 1 P
    NAV1C 0 LIBRE6 0 P
    COM2A 2 LIBRE 0 P
    COM2B 2 LIBRE2 0 P
    COM2C 2 LIBRE6 1 P
    S_COM1 4 SWAP 8 0
    S_NAV1 4 SWAP 2 0
    S_COM2 4 SWAP 4 0
    S_NAV2 4 SWAP 1 0
    COM1D 5 LIBRE4 0 P
    COM1E 5 LIBRE5 0 P
    NAV1D 0 LIBRE4 0 P
    NAV1E 0 LIBRE5 0 P
    COM2D 2 LIBRE4 0 P
    COM2E 2 LIBRE5 0 P
    ADFA 3 LIBRE 0 P
    ADFB 3 LIBRE2 0 P
    ADFC 3 LIBRE6 0 P
    ADFD 3 LIBRE4 1 P
    ADFE 3 LIBRE5 0 P
    TXPA 40 LIBRE 0 P
    TXPB 40 LIBRE2 0 P
    TXPC 40 LIBRE6 0 P
    TXPD 40 LIBRE4 0 P
    TXPE 40 LIBRE5 1 P
    NAV2A 1 LIBRE 0 P
    NAV2B 1 LIBRE2 0 P
    NAV2C 1 LIBRE3 1 P
    NAV2D 1 LIBRE4 0 P
    NAV2E 1 LIBRE5 0 P
    NAV2F 1 LIBRE6 0 P
    COM1F 5 LIBRE3 0 P
    NAV1F 0 LIBRE3 0 P
    COM2F 2 LIBRE3 0 P
    ADFF 3 LIBRE3 0 P
    TXPF 40 LIBRE3 0 P
    COM1_SOUND 34 FS_COM1_SND B+7 B-7 P
    COM2_SOUND 32 FS_COM2_SND B+6 B-6 P
    NAV1_SOUND 28 FS_NAV1_SND B+4 B-4 P
    NAV2_SOUND 27 FS_NAV2_SND B+3 B-3 P
    MKR_SOUND 35 FS_MKR_SND B+2 B-2 P
    DME_SOUND 33 FS_DME_SND B+1 B-1 P
    ADF_SOUND 31 FS_ADF_SND B+0 B-0 P

    SWR / ENCODERS
    ==============
    Name Initial Input Variable Aceleration/-K Cte. Inc./+K Type
    ____ _____________ ________ ______________ ____________ ____
    R_COM1_H 16 R_COM_SB 4 5 2
    R_COM1_L 13 R_COM_SB 1 100 2
    R_NAV1_H 16 R_NAV1_SB 4 5 2
    R_NAV1_L 13 R_NAV1_SB 1 100 2
    R_COM2_H 16 R_COM2_SB 4 5 2
    R_COM2_L 13 R_COM2_SB 1 100 2
    ROT_ADF 16 R_ADF 5 1 2
    ROT_TXP_H 16 R_TXP 1 1 2
    ROT_TXP_L 13 R_TXP 1 64 2
    R_NAV2_H 16 R_NAV2_SB 4 5 2
    R_NAV2_L 13 R_NAV2_SB 1 100 2
    R_COM1_H 25 R_COM_SB 1 5 0

    DISPLAYS 7-S
    ============
    Name Initial Digit Variable Numbers Options
    ____ _____________ ________ _______ _______
    COM1_SB 4 DIS_COM_SB 4 N
    NAV1_SB 4 DIS_NAV1_SB 4 N
    COM2_SB 4 DIS_COM2_SB 4 N
    COM1_AC 0 COM1_AC 4 N
    NAV1_AC 0 NAV1_AC 4 N
    COM2_AC 0 COM2_AC 4 N
    ADF 0 DIS_ADF 4 N
    TXP 16 DIS_TXP 4 N
    NAV2_AC 0 NAV2_AC 4 N
    NAV2_SB 4 DIS_NAV2_SB 4 N

    OUTS & CONFIG
    =============
    Name N.Output Variable Value ON Value OFF
    ____ ________ ________ ________ _________
    IFNAV1 *NAV1_SB LIBRE2 0
    IFCOM2 *COM2_SB LIBRE6 0
    IFCOM1 *COM1_SB LIBRE 0
    LEDCOM1 15 LIBRE 1
    LEDNAV1 14 LIBRE2 1
    LEDCOM2 12 LIBRE6 1
    IFRCOM1 #R_COM1_H LIBRE 0
    IFRCOM11 #R_COM1_L LIBRE 0
    IFRNAV1 #R_NAV1_H LIBRE2 0
    IFRNAV11 #R_NAV1_L LIBRE2 0
    IFRCOM2 #R_COM2_H LIBRE6 0
    IFRCOM22 #R_COM2_L LIBRE6 0
    IFSCOM1 %S_COM1 LIBRE 0
    IFSNAV1 %S_NAV1 LIBRE2 0
    IFSCOM2 %S_COM2 LIBRE6 0
    IFCOM1AC *COM1_AC LIBRE 0
    IFNAV1AC *NAV1_AC LIBRE2 0
    IFCOM2AC *COM2_AC LIBRE6 0
    IFADF *ADF LIBRE4 0
    IFTXP *TXP LIBRE5 0
    IFRADF #ROT_ADF LIBRE4 0
    IFTXPH #ROT_TXP_H LIBRE5 0
    IFTXPL #ROT_TXP_L LIBRE5 0
    LEDADF 11 LIBRE4 1
    LEDTXP 40 LIBRE5 1
    ACTCOM1 >R_COM_SB SWAP 0
    ACTNAV1 >R_NAV1_SB SWAP 0
    ACTCOM2 >R_COM2_SB SWAP 0
    IFNAV2 *NAV2_SB LIBRE3 0
    LEDNAV2 13 LIBRE3 1
    IFRNAV2 #R_NAV2_H LIBRE3 0
    IFRNAV22 #R_NAV2_L LIBRE3 0
    IFSNAV2 %S_NAV2 LIBRE3 0
    IFNAV2AC *NAV2_AC LIBRE3 0
    ACTNAV2 >R_NAV2_SB SWAP 0
    LED_COM1 17 FS_COM1_SND B7
    LED_COM2 19 FS_COM2_SND B6
    LED_NAV1 23 FS_NAV1_SND B4
    LED_NAV2 24 FS_NAV2_SND B3
    LED_MKR 16 FS_MKR_SND B2
    LED_DME 18 FS_DME_SND B1
    LED_ADF 21 FS_ADF_SND B0

    DEF.FUNCTIONS
    =============
    Name If Value > Then Valor = If Value < Then Value = Value=Value x Value=Value +
    ____ ___________ ____________ __________ ____________ _____________ _____________


    SERVO-E.
    ========
    Name Initial Output Variable Left Pos. Center Pos. Right Pos.
    ____ ______________ ________ _________ ___________ __________


    STEEP-E.
    ========
    Name Initial Output Variable Aceleration Type
    ____ ______________ ________ ___________ ____


    ANALOGIC INPUT
    ==============
    Name Initial Input Variable Left Pos. Center Pos. Right Pos.
    ____ _____________ ________ _________ ___________ __________


    LCD DISPLAY
    ===========
    Name Initial Output Variable Initial Digit Numbers Options
    ____ ______________ ________ _____________ _______ _______


    ________END_OF_REPORT_______ (IOCards by Manolo Vélez)
    This is not quite complete, but fully workable. Use the manual and you will get the hang of it.
    Regards..............Brian W.

  9. #8
    25+ Posting Member totalflyer's Avatar
    Join Date
    Dec 2008
    Location
    Keswick, ON
    Posts
    30
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Great job Brian... Your work is truly beautiful...
    Jeff Carswell
    A330-343x

    Intel Core 2 Quad Q8400 @ 2.66GHz
    4GB OCZ DDR2 PC1066 Gigabyte G31M-ES2L MB
    NVIDIA GeForce 7900 GTO 512mb

  10. #9
    25+ Posting Member
    Join Date
    Aug 2008
    Location
    USA
    Posts
    64
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hi Brian,

    Beautiful setup. Out of curiosity: What panels are those? I am thinking both the RMP and the audio panel?
    Thanks,

    Boaz
    KSEA
    Lose money - ask me how.

  11. #10
    Executive Vice President, MyCockpit


    Matt Olieman's Avatar
    Join Date
    Oct 2005
    Location
    Ocala, FL USA
    Posts
    2,883
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Thumbs up Brian is amazing

    Quote Originally Posted by PittsburghLever View Post
    Hi Brian,

    Beautiful setup. Out of curiosity: What panels are those? I am thinking both the RMP and the audio panel?
    Brian is just AMAZING, he makes his own panels. Brian is our first Builder Of The Month (BOM), check out his interview in the BOM area. Very impressive builder.

    Matt Olieman

Page 1 of 2 12 LastLast

Similar Threads

  1. Radio Stack For Sale
    By CessnaGuy in forum General Aviation (GA) Builder Disccusion
    Replies: 10
    Last Post: 03-09-2010, 08:45 AM
  2. My Bendix King Radio Stack
    By CessnaGuy in forum My Cockpit Update
    Replies: 18
    Last Post: 10-09-2009, 05:23 PM
  3. Wiring my Bendix radio stack!
    By CessnaGuy in forum General Aviation (GA) Builder Disccusion
    Replies: 9
    Last Post: 10-09-2009, 01:20 PM
  4. Build a Radio Stack??
    By tunatuk in forum Where to Start Building a Home Cockpit
    Replies: 14
    Last Post: 02-06-2007, 11:08 AM