Results 1 to 10 of 12
Thread: 3 or 4 or 5 axis CNC machine ?
-
03-07-2014, 07:25 AM #1
- Join Date
- Aug 2010
- Location
- Norway
- Posts
- 123
3 or 4 or 5 axis CNC machine ?
I will buy a CNC machine.
I will make gears, tube, pipe, holes, arrow, motor, instruments that counting; in short sentence, I will make mostly analog instruments.
-
03-07-2014, 10:04 AM #2
Re: 3 or 4 or 5 axis CNC machine ?
Hello Qwseyvnd - nice name btw....
Are you still in the decision loop - I though you already had ordered
your 5 axis CNC back in 2012
What you need is a 3 axis CNC or a CNC vertical mill or both.
Add an Index wheel (makes it actually a 4 axis CNC).
Then you need a steady Drill Press and a Mini Lathe.
And finally add 3 axis CNC Laser
So better start your savings immediately
Seriously – if your material is not harder than Aluminum,
you’ll get a very long way with a 3 axis flatbed CNC, Index wheel and a Drill Press.
-
03-07-2014, 12:24 PM #3
- Join Date
- Aug 2010
- Location
- Norway
- Posts
- 123
Re: 3 or 4 or 5 axis CNC machine ?
Thank you for the nice nick name.
I think it is better to buy 5 axis CNC. It is more precise with 5 axis.
-
03-07-2014, 01:05 PM #4
Re: 3 or 4 or 5 axis CNC machine ?
Hi Qwseyvnd
Well, I don’t believe the precision has anything to do with the number of axis,
Precision and cost are much related though. I think I can build a 5 axis CNC for less than
$1000 but the "output" would be real crap
What I tried to tell you about the nick name is simply to start signing your posts as I prefer to “talk” to real names…
-
03-19-2014, 03:56 AM #5
- Join Date
- Aug 2010
- Location
- Norway
- Posts
- 123
Re: 3 or 4 or 5 axis CNC machine ?
Understood. Maybe it is better I buying one 4 axis CNC machine with option 4 or 3 axis and high precision ?
-
03-19-2014, 08:00 PM #6
Re: 3 or 4 or 5 axis CNC machine ?
I have been machining sim parts for four years on my CNC and everything can be done on a 4 axis machine. The only times I have actually used the fourth axis was for engraving throttle knobs and machining flutes on custom switch knobs. A good tip - make sure your rotary fourth axis can be tilted, I use a locking vice with it's own protractor. Very hand for cutting flutes on tapered knobs etc. I can't see any value in a 5th axis (horizontal rotary table).
Cheers Gwyn
737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
http://www.aerosimsolutions.com.au
Supporter of MyCockpit.org, please join me in donating!!!
-
04-05-2014, 05:36 PM #7
- Join Date
- Aug 2010
- Location
- Norway
- Posts
- 123
Re: 3 or 4 or 5 axis CNC machine ?
I am still in Berlin. I have been taken measurement of the instruments and the size of the cockpit; and take the photos of every parts.
-
04-06-2014, 05:01 AM #8
- Join Date
- Mar 2013
- Location
- Finland
- Posts
- 61
Re: 3 or 4 or 5 axis CNC machine ?
Germany have many hobby builders were make cnc and have many place were buy cnc router main board set cheap, i orden there some board and make 3 axis cnc my 2 cnc machine, first i made own brinted circuid board, but better buy board ready to use, come cheapen than make all itself.
need only connect stepper motors to board and power and BIG condensators. each axis.
i on remember what name board i orden year 2006 at germany but have same today too, many hobbyist use thats, you must be google cnc machine and self building kits.
my cnc cost secon hand motors and frame parts about 300 euro. board about under 100 € and all other parts i found at junkyard.
can make wood and plastic good, but if need metal cnc router, need lot better heavy strong main frame and thats not cheap, better made metall cnc old mill machine.
-
04-06-2014, 05:31 AM #9
- Join Date
- Mar 2013
- Location
- Finland
- Posts
- 61
Re: 3 or 4 or 5 axis CNC machine ?
Germany have many hobby builders were make cnc and have many place were buy cnc router main board set cheap, i orden there some board and make 3 axis cnc my 2 cnc machine, first i made own brinted circuid board, but better buy board ready to use, come cheapen than make all itself.
need only connect stepper motors to board and power and BIG condensators. each axis.
i on remember what name board i orden year 2006 at germany but have same today too, many hobbyist use thats, you must be google cnc machine and self building kits.
my cnc cost secon hand motors and frame parts about 300 euro. board about under 100 € and all other parts i found at junkyard.
can make wood and plastic good, but if need metal cnc router, need lot better heavy strong main frame and thats not cheap, better made metall cnc old mill machine.
only no hand men no can make own cnc machine and buy ready to use machine at shop, stupid because why pay 2000-5000 ready machine because all can made itself at home same or better under 1000 €
-
04-06-2014, 08:44 PM #10
- Join Date
- Aug 2010
- Location
- Norway
- Posts
- 123
Search Girls from your city for night
B_34 TOGA takeoff