Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    New Member
    Join Date
    Jul 2007
    Location
    29 Newton Close,Paynesville,Victoria,Australia
    Posts
    2
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hello every body -

    I am new to this world of flight simulators. I have been reviewing that many sites I am almost confused which isn't hard to do. I am 66 years young at the end of this month.I started to fly at age 16 years through the R.A.A.F. Air Training Corpes, at Moorabbinn Airport where at that time it was an all over field with a very small area of sealled runway, nothing like it is today. I learnt on Chipmonks and Tigermoths. At that time when my hours reach the alloted amount I ceased flying. As I was an apprentice electrian with a very, very small wage.When I reached 18years I was required to leave the A.T.C. & I was about to join the R.A.A.F.Reserve when they cut out flying for Reserve pilots. I joined a Commando unit where I jumped out of good serviceable A/C. I did that for 10 odd years, In the intermin I returned to flying this time in modern A/C to an unrestricted pilots licence this was 1964. I studied for a Commercial licence and remained flying up to 1998, then my health took a noise dive. I miss not bering able to fly, however I am now attempting to continue by trying to build a flight simulator. I am not a modern jet person, I have decided to go for a Beechcraft Baron 58.The ones I have seen have been so brilliant, being retired on limited finance we will see. You people are so clever . I hope that this short story will give you all an insight to me. One request - "Can I count on assistance please."

  2. #2
    150+ Forum Groupie QF6228's Avatar
    Join Date
    May 2007
    Location
    Australia
    Posts
    186
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hello..Welcome

    You have come to the right site for unlimited help

    Great bunch of guys & girls not to mention a few Beechcraft builders to

    Good Luck
    Damien
    Last edited by QF6228; 09-11-2007 at 05:01 AM.

  3. #3
    MyCockpit Support Staff


    Westozy's Avatar
    Join Date
    Nov 2005
    Location
    Perth, Western Australia
    Posts
    1,412
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Welcome to MyCockpit Mumbles,

    Good luck on your mission, your in for a lot of fun and games in a very rewarding pastime.

    Regards, Gwyn

    737NG using Prosim737, Immersive Calibration Pro, Aerosim Solutions motorized TQ & cockpit hardware, CP Flight MCP & FDS SYS1X, SYS2X & SYS4X, FDS PRO FMCs, AFDS units & Glarewings, Matrix Orbital ELEC display, Pokeys Landing & Cruise alt display, Buttkicker Gamers, 3 x BenqMW811ST projectors with a Matrox Th2Go
    http://www.aerosimsolutions.com.au
    Supporter of MyCockpit.org, please join me in donating!!!

  4. #4
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,221
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Hi mumbles,

    66 Years Young, thats excellent. I am excited that you have decided to join us all here at Mycockpit. Please feel free to post some pictures of your progress in the Photo Gallery. It is exciting that you learned on the Tiger moth. Thats one beautiful aircraft.

    I am eager to see your progress as things move along. Please ask as many questions as you want, and remember.... Once you get started, You won't be able to stop

    Best regards,

    Trev
    ________________________
    Trevor Hale

  5. #5
    1000+ Poster - Fantastic Contributor Tomlin's Avatar
    Join Date
    Nov 2005
    Location
    Waycross, GA
    Posts
    1,025
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Mumbles, what a great history you have shared with us. I bet you could tell some stories...

    So that we can be of the utmost help to you, can you give us a few bits of info so that we can have a better idea of what you hope to attain? Here are some points to ponder. Do you want:

    *A full (meaning two seat/two yokes) Barron 58 OR a single seat/single yoke cockpit for just one person

    *A full visual system with 3 or more projectors, or large LCD displays

    *Real-looking analogue type instruments, or an LCD display covered by bezels (which is much more affordable)

    These are some basic questions that are really good to start off with, because it gives everyone here an idea of what amount of work and items will be needed to get you started.

    All the best, I love the B58
    Eric Tomlin-
    Learjet 45 Builder
    www.flightlevel180.org

  6. #6
    500+ This must be a daytime job JBaymore's Avatar
    Join Date
    Mar 2005
    Location
    Wilton, New Hampshire USA
    Posts
    601
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by mumbles View Post
    One request - "Can I count on assistance please."
    Welcome to the craziness and you certainly will find help from the folks who hang out here.

    best,

    ..............john

  7. #7
    1000+ Poster - Fantastic Contributor Bob Reed's Avatar
    Join Date
    Oct 2005
    Location
    Holley, New York U.S.A.
    Posts
    1,776
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Mumbles, welcome to the mad house! We all started something like you are right now. Lots of questions and looking very unattainable. Most of us where not electronic experts (and still are not!) but as our project grew, so did and do our skills! Start slow and allow it to grow. Start by getting a desktop setup going. Get a yoke and some rudder pedals and then fly for a bit. Then start out where your skills are greatest. Skills you don't have see if you can get a friend to help in that area. Trust me if not for a friend of mine my construction would not look as good as it does. And yes please feel free to ask questions here that is what mycockpit was built for... Builders helping builders! And pictures yes PLEASE share them. Even ones you do not see as important to others. If you have a desktop sin already I would love to see pics and see how you have set it up. And remember it is all about the flying... Never stop flying even while you are building!
    Bob Reed

  8. #8
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,221
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by Bob Reed View Post
    And remember it is all about the flying... Never stop flying even while you are building!
    Sounds like some sound advice Mr. Reed.... Perhaps you need to reed this!

    LOL What do ya think? Do I need to buy you a new helmet?
    ________________________
    Trevor Hale

  9. #9
    2000+ Poster - Never Leaves the Sim Michael Carter's Avatar
    Join Date
    Oct 2006
    Location
    Southern Illinois, USA
    Posts
    2,881
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Welcom to the forum! Always good to have another experienced hand aboard.

    As long as you are considering a Baron, you might also consider the King Air. There is a full suite of analog guages available for the King Air. I forget the company name but I have it bookmarked if you are interested.
    Boeing Skunk Works
    Remember...140, 250, and REALLY FAST!

    We don't need no stinkin' ETOPS!



    Powered by FS9 & BOEING

  10. #10
    2000+ Poster - Never Leaves the Sim Trevor Hale's Avatar
    Join Date
    Nov 2005
    Location
    Ontario, Canada
    Posts
    2,221
    Contribute If you enjoy reading the
    content here, click the below
    image to support MyCockpit site.
    Click Here To Contribute To Our Site

    Quote Originally Posted by Boeing Skunk Works View Post
    Welcom to the forum! Always good to have another experienced hand aboard.

    As long as you are considering a Baron, you might also consider the King Air. There is a full suite of analog guages available for the King Air. I forget the company name but I have it bookmarked if you are interested.
    Flight Illusion http://www.flightillusion.com makes a fantastic set!
    ________________________
    Trevor Hale

Page 1 of 2 12 LastLast

Similar Threads

  1. Any body with knowledge of gauges in FSX
    By 737NUT in forum I/O Interfacing and Hardware
    Replies: 3
    Last Post: 01-10-2010, 05:15 PM