MCDU V3 Win10 Build 1903

[pmartin]

Hello did any have the same probleme with the sioc-creator and the MCDU V3?
After starting the sioc-creator and fill in the path of sioc and the number of the key (i found it at the sioc).
But it doesn´t work.
Can anyone help
best regards
peter

[pmartin]

The ConfigUSBKey.ssi
// *****************************************************************************
// * Config_SIOC ver 5.1 - By Manuel Velez - www.opencockpits.com
// *****************************************************************************
// * FileName : sioc.txt
// * Date : 11.08.2019






Var 0001, name key, Link USB_KEYS, Device 12

The sioc.ini
[ fichero de configuracion para el SIOC ver. 5.0 ]
[ Configuration file for SIOC ]




[************** SIOC ***************]


[ Nombre asignado al SIOC ]
[ SIOC name ]
Name=MAIN_SIOC


[ Puerto del servidor IOCP ]
[ IOCP port ]
IOCP_port=8092


[ Tiempo de respuesta máximo de los paquetes IOCP ]
[ IOCP Timeout ]
IOCP_timeout=3500


[ Arranque minimizado en la barra ]
[ Start minimized in tray ]
Minimized=No


[ Retraso necesario para las variables toggles (Project Magenta)]
[ Deley needed for var. toggles (Project Magenta) ]
Toggle_delay=20


[ Fichero de configuracion ]
[ Configuration File ]
CONFIG_FILE=.\ConfigUSBkeys.ssi


[************** VIRTUAL DEVICES ***************]


[ Habilita recepcion de Dispositivos Virtuales yes/no ]
[ Enable Receive Virtual Devices yes/no ]
Vdevices_enable=No


[ Tiempo de espera para carga inicial de Dispositivos Virtuales (ms)]
[ Wait time for load Virtual Devices (ms)]
Vdevices_wait=2000


[ Modo Esclavo para SIOC como servidor de dispositivos yes/no ]
[ Slave mode for SIOC Virtual Devices Server yes/no ]
Vdevices_slave=No




[ Host y Puerto del SIOC donde reenviar los Dispositivos ]
[ SIOC Host/Port to resent Devices ]
Vdevices_host=192.168.1.5
Vdevices_port=8092




[************** MONITOR MODULE ***************]


[ Desabilitar monitorizacion remota del SIOC ]
[ Remote monitor disable mode yes/no ]
Monitor_disable=No


[ Refresco broadcast monitor (en segundos) ]
[ Broadcast monitor time (seconds) ]
Monitor_time=2




[************** IOCARDS MODULE ***************]


[ Desactivar el módulo de las IOCards ]
[ Disable IOCards module ]
IOCard_disable=No


[ Divisor de frecuencia para los ejes analogicos (1-999). Retarda la entrega de valores. ]
[ Frequency divisor for delay the analogic axes. (1-999)]
Divisor_AD=10


[------------- CARDS CONFIG -------------]


[ IOCard Master ]
[...............]


[ Spanish : ]


[ MASTER=(Indice device),(Tipo),(Número de tarjetas),(Número device) ]


[ Indice Device: �ndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]


[ tipo = 0 : Emulador de Master Card // OBSOLETO ]
[ tipo = 1 : Tarjeta Master conectada al puerto paralelo directamente // OBSOLETO ]
[ tipo = 2 : Tarjeta Master conectada al puerto paralelo mediante cable de compatibilidad // OBSOLETO ]
[ tipo = 3 : Placa de expansión por puerto paralelo // OBSOLETO ]
[ tipo = 4 : Tarjeta USBExpansion usada ]
[ tipo = 5 : Modulo MCP de Opencockpits ]
[ tipo = 6 : Tarjeta USBOutputs ]
[ tipo = 7 : Modulo EFIS de Opencockpits ]
[ tipo = 8 : Modulo Radio COM de Opencockpits ]
[ tipo = 9 : Modulo Radio NAV de Opencockpits ]
[ tipo = 10 : Modulo Radio ADF de Opencockpits ]
[ tipo = 11 : Modulo Radio ATC de Opencockpits ]
[ tipo = 12 : Modulo Radio Airbus RMP de Opencockpits ]
[ tipo = 13 : Modulo FMC-737 de Opencockpits ]
[ tipo = 14 : Tarjeta USBDcmotorPLUS ]
[ tipo = 15 : Modulo MCP V3 de Opencockpits ]
[ tipo = 16 : Modulo CRONOMETRO B737 ]
[ tipo = 17 : Tarjeta USBDimcontrol ]
[ tipo = 18 : Modulo Audio B737 ]
[ tipo = 19 : Modulo FIRE ENGINES B737 ]
[ tipo = 20 : Modulo PEDESTAL B737 ]




[ Número de tarjetas = Número de placas Master usadas, 1 a 4 para uso de placas de expansión, 1 para conexión de placa Master directa o del Emulador ]


[ Número de device = 0 en el caso del Emulador o primera tarjeta USB detectada, Dirección del puerto paralelo (por ejemplo $037, o número de dispositivo USB ]




[ Un ejemplo de 2 USBExpansion conectadas con 3 y 2 placas Master ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]


[ Un ejemplo de conexión a simulador ]
[ MASTER=0,0,1,0 ]




[ English : ]


[ MASTER=(Device index),(Type),(Number of cards),(Device number) ]


[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]


[ type = 0 : Master Card Emulator // OBSOLETE ]
[ type = 1 : Master Card connected directly to parallel port // OBSOLETE ]
[ type = 2 : Master Card connected throught compatibility cable to parallel port //OBSOLETE]
[ type = 3 : Expansion Card connected throught parallel port //OBSOLETE ]
[ type = 4 : USBExpansion Card used ]
[ type = 5 : Opencockpits MCP module ]
[ type = 6 : USBOutputs Card used ]
[ type = 7 : EFIS module ]
[ type = 8 : Radio COM module ]
[ type = 9 : Radio NAV module ]
[ type = 10 : Radio ADF module ]
[ type = 11 : Radio ATC module ]
[ type = 12 : Radio RMP Airbus module ]
[ type = 13 : FMC-737 module ]
[ type = 14 : USBDCmotorPLUS Card used ]
[ type = 15 : MCP V3 module ]
[ type = 16 : CHRONO B737 module ]
[ tipo = 17 : USBDimcontrol card used ]
[ tipo = 18 : Audio B737 module ]
[ tipo = 19 : FIRE ENGINES B737 module ]
[ tipo = 20 : PEDESTAL B737 module ]


[ Number of Cards = Master cards connecteds, 1 to 4 for expansion cards, 1 for a Master card directly connected or Emulator ]


[ Number of device = 0 for Emulator or first USB card detected, parallel port address, device number for specifies USBexpansion card ]


[ For example, two USBExpansion cards connected with 3 and 2 Master cards used ]
[ MASTER=0,4,3,22 ]
[ MASTER=1,4,2,24 ]


[ For example, use of Master card emulator ]
[ MASTER=0,0,1,0 ]


[ Use the first USBExpansion card connected with only one Master Card attached ]
[ Esta definición es para usar la primera tarjeta USBExpansion que se encuentre instalada que además llevará conectada una placa Master ]


[MASTER=3,6,1,252]
[MASTER=0,4,1,0]
[MASTER=0,12,1,0]
[MASTER=20,20,2,1055]


[ Others Cards / Otras tarjetas ]
[...............................]


[ Spanish : ]


[ Nombre_de_tarjeta=(Indice device),(Número device) ]


[ Indice Device: �ndice usado en la variable SIOC como device, para indicar a que tarjeta se hace referencia ]
[ Se usa 0 en el caso de que sólo haya una tarjeta y no se tenga en cuenta el número de device, por defecto un script en SIOC cuando no se pone parámetro DEVICE, se hace referencia al índice 0]


[ Número de device = 0 para usar primera tarjeta USB de este tipo detectada ó número de dispositivo USB ]




[ English : ]


[ Name_of_card=(Device index),(Device number) ]


[ Device index : Index used in SIOC variable like device, this is the card used for SIOC sentence ]
[ Use 0 for only one card, for this value you not need specify Device number. If you not use DEVICE parameter in a definition in SIOC script, the default index used is 0]


[ Number of device = 0 for first USB card of this type detected, or device number for a specifies device ]


[ Ejemplo de dos USBServos en indices 0 y 1, y números de devices 17 y 23 ]
[ Example of two USBServos for index 0 and 1, and device number 17 and 23 ]


[ USBServos=0,17 ]
[ USBServos=1,23 ]




[USBStepper=0,0]
[USBKeys=0,0]
[USBServos=0,0]
[USBRelays=0,0]
[USBDCmotor=0,0]


[ Para los ejes analógicos se usan los números de devices de las tarjetas donde están alojados ]
[ For analogic axles, you use the device number of cards what allow the axles ]


[USBAnalogic=0,0]




[************** FSUIPC MODULE ***************]


[ Desabilitar lectura de las FSUIPC ]
[ FSUIPC disable mode yes/no ]
FSUipcdisable=No


[ Refresco recepción FSUIPC ]
[ FSUIPC refresh ]
FSUipcRefresh=50




[************** IOCP CLIENTS MODULES ***************]


[ Retraso para inicializacion una vez conectado el cliente en milisegundos ]
[ Delay for initialization when client has been connected in mseconds ]
IOCPini_delay=0


[************** IOCP CLIENT MODULE #0 ***************]


[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient0_disable=Yes


[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient0_host=LOCALHOST


[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient0_port=8099




[************** IOCP CLIENT MODULE #1 ***************]


[ Desactivar el módulo cliente IOCP ]
[ Disable IOCP client module ]
IOCPclient1_disable=Yes


[ IP del servidor donde debe de conectar el cliente ]
[ IOCP client host name ]
IOCPclient1_host=LOCALHOST


[ Puerto de envio del protocolo IOCP cliente ]
[ IOCP client port ]
IOCPclient1_port=8099




[************** SOUND MODULE ***************]


[ Ficheros de sonido ]
[ Sound Files ]


[ Desactivar el módulo de sonido ]
[ Disable Sound module ]
Sound_disable=Yes


[ Volumen general de los sonidos 0-100 ]
[ Master Volume 0-100 ]
Volume=100




[ put '*' first filename for loop Sound ]
[ anteponer '*' en el fichero para bucle continuo de sonido]


[ Sound=wav_file,frequency,volume,pan ]
[ frequency=100 to 100000 0=original -1=current ]
[ volume=0 to 100, -1=current ]
[ pan=-100 (left) to +100 (right) 0=center -1=current ]


[ Sound=Fichero_wav,frecuencia,volumen,balance ]
[ frecuencia=100 hasta 100000 0=original -1=Por defecto ]
[ volumen=0 hasta 100 -1=Volumen por defecto ]
[ balance=-100 (Izquierda) hasta +100 (Derecha) 0=centro -1=Por defecto ]


[ #1 ]
Sound=APDis.wav,-1,-1,-1


[ #2 ]
Sound=*outermk.wav,-1,-1,-1


[ #3 ]
Sound=*hello.wav


[************** KEYBOARD EMULATOR MODULE ***************]


[ Nombre exacto de la ventana donde se enviarán las teclas ]
[ Name of window for key send ]
[window = "Project Magenta Glass Cockpit - Build 396" ]


window =a.txt - Bloc de notas




[ Asignación de teclas ]
[ assign youe keys ]


#1=A
#2=B
#3=C
#4=D
#5=E
#6=F
#7=G
#8=H
#9=I
#10=J
#11=K
#12=L
#13=M
#14=N
#15=O
#16=P
#17=Q
#18=R
#19=S
#20=T
#21=U
#22=V
#23=W
#24=X
#25=Y
#26=Z
#27=1
#28=2
#29=3
#30=4
#31=5
#32=6
#33=7
#34=8
#35=9
#36=0
#37=<
#38=,
#39=.
#40=-
#41=*
#42=+
#43=//
#44=/0
#45=/1
#46=/A
#47=<T
#48=
#49=
#50=
#51=
#52=
#53=
#54=
#55=
#56=
#57=
#58=
#59=
#60=
#61=
#62=
#63=
#64=
#65=
#66=
#67=
#68=
#69=
#70=
#71=
#72=
#73=
#74=
#75=
#76=
#77=
#78=
#79=
#80=
#81=
#82=
#83=
#84=
#85=
#86=
#87=
#88=<a
#200=B


[ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 13:14:54 <== ----]
[USBKeys=9,9]






[ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 13:53:56 <== ----]
[USBKeys=9,4]


[ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 13:54:07 <== ----]
[USBKeys=4,4]


[ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 14:00:39 <== ----]
[USBKeys=12,4]


[ --- SIOC Autoconfig Devices Ver 5.0 B5 ==> 11.08.2019 14:08:40 <== ----]
USBKeys=12,4


Hey i hoppe anyone can help me!
Best regards
peter

[pmartin]

Hey Folks! I have done by my own!
I found the right way!
Sorry
Peter