Results 1 to 10 of 11
Thread: Phidgets Encoder values
-
12-17-2008, 11:02 PM #1
Phidgets Encoder values
Guys,
I thought this would be easy...but...Im trying to configure my phidgets encoder to a PMSystems offset of 56A8(Flt alt knob) with "1" as the value when I turn to the left and "2" as the values when i turn to the right..."0" when stopped.
Ive tried every combo in FSVariables but it outputs values 1 AND 2 in either direction...
Anybody successfully configured a phidgets encoder yet????
Cheers,
Nat
-
12-17-2008, 11:10 PM #2
- Join Date
- Jan 2007
- Location
- Texas
- Posts
- 582
Nat,
I will try out that offset this weekend.
There may be a bug in the program.
If I need any more info I will shoot you an email.
Regards,
Alan.
-
12-18-2008, 03:05 AM #3
- Join Date
- Jan 2007
- Location
- Texas
- Posts
- 582
Nat,
In the interim, could you send me your zipped ini settings.
I would need the phidgets.ini and the ini file for your encoder card.
Thanks,
Alan.
-
12-18-2008, 04:00 AM #4
Ok Alan...I'll do it tonight...
Thanks,
Nat
-
12-18-2008, 06:16 AM #5
Alan,
Couldn't find your email so I posted the configs here.
Just a note, I have the Flt alt and Land Alt displaying the correct digits on
my Phidgets LED board with PM Systems...just can't get the encoder to work properly...
Nat
-
12-30-2008, 04:51 PM #6
- Join Date
- Jan 2007
- Location
- Texas
- Posts
- 582
Nat,
It appears there are two offsets for the Flt Alt. 56AC and 56A8.
It looks as though 56A8 (the one you are attempting to use) is intended to be used with a 3-position spring-loaded-to-center rotary switch. Not familiar with that offset - I do not have latest sysvar.txt in front of me.
As I recall many of the flight deck switches now operate like this.
You may have more success incrementing and decrementing the altitude value directly (the thread I pointed you to) using 56AC offset. The basis for fs2Phidget encoder operation is incrementing or decrementing a range of values.
Regards,
Alan
-
12-30-2008, 05:42 PM #7
- Join Date
- Jan 2007
- Location
- Texas
- Posts
- 582
Could you confirm if offset is 36A8 or 36A9?
Length of 1?
-
01-07-2009, 08:55 PM #8
- Join Date
- Jan 2007
- Location
- Texas
- Posts
- 582
Nat,
Did enhancement work?
Alan.
-
01-08-2009, 10:51 PM #9
- Join Date
- Jan 2007
- Location
- Texas
- Posts
- 582
Nat,
Could you touch base with cupaoloit.
cupaoloit is also trying to get Flt-Alt working.
Had his working a while back.
Regard,
Alan
-
01-08-2009, 11:41 PM #10
No worries Alan...
Thanks,
Nat
Similar Threads
-
Turning a Rotary encoder with a pushbutton into a dual rotary encoder
By snizbatch in forum I/O Interfacing Hardware and SoftwareReplies: 2Last Post: 05-11-2009, 02:57 AM -
Phidgets Encoder (Code 1052)
By AchillesP in forum Phidgets & Cockpit Simulator BuilderReplies: 1Last Post: 05-12-2008, 06:41 AM -
Phidgets Rotary Encoder speed?
By Tomlin in forum I/O Interfacing Hardware and SoftwareReplies: 0Last Post: 09-15-2007, 01:09 AM -
Low values for N1 and N2, and thanks.
By RobertoR in forum FS2Phidget UsersReplies: 2Last Post: 02-03-2005, 03:38 PM
Pretty Girls from your city for night
Generic Analog Gauges